Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Omex 710
Applies to
Omex 710
Tool groups
None
Manufacturers
None

The Omex 710 (OMEM710) standalone ECU uses one 36-way loom connector. Its cavities are in three rows, A, B and C, with positions 1 to 12 in each row; the middle row is offset by half a pitch. According to the manufacturer's hardware manual 2v11, 35 of the 36 cavities are assigned and 4C has no function listed.

Connector pinout

The connector face is drawn from the wiring-loom side, as in section 29.2 of the manual. Battery power enters at 4A, and 5A and 7B are the power grounds. 6A is the sensor ground and 9C is the 5 V sensor supply. The crank sensor is at 7A with its timing ground at 8A, and the cam sensor is at 11A. There are six ignition outputs, IGN1 to IGN6, and eight fuel outputs, FUEL1 to FUEL8. Two high-side outputs are at 5C and 1C, and an output named ALT POWER is at 11C. Inputs include two MAP channels (6B and 10A), two oxygen sensors (7C and 11B), knock (10B), throttle position (8C) and road speed (10C).

The manual gives the output names, not fixed engine functions. FUEL outputs can be allocated as injection or PWM outputs, and some IGN outputs have configurable alternatives. Loom colours are in the pin list as main colour / tracer; no colour is given for 8A. Check the output allocation and the actual loom before wiring.

Diagram redrawn by Tuning Wiki from the Omex OMEM710 hardware manual.

Sources

Connector pinout

Applicability

Omex 710 (OMEM710) standalone ECU, 36-way loom connector, from the manufacturer's hardware manual 2v11 (section 29.2, ECU connector pin table and loom-side drawing). Manufacturer documentation. Cavity 4C has no function listed; 8A (timing ground) has no loom colour given. Loom colours are given in the pin notes as main colour / tracer. FUEL outputs can be allocated as injection or PWM outputs and some IGN outputs have configurable alternatives, so the names give the manual's default output names, not a fixed engine function.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

ECU loom connector (36-way)

Redrawn connector face
View: Harness plug viewed from the wiring-loom side, as drawn in the manufacturer manual
ECU loom connector (36-way) — Redrawn connector face. Harness plug viewed from the wiring-loom side, as drawn in the manufacturer manual

Select a pin in a photograph or the index to highlight it.

ECU loom connector (36-way) — complete pin index
PinFunction / cavityConfidence / sourceNotes
IGN1 (ignition output 1)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / black.
IGN6 (ignition output 6)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / violet.
FUEL8 (fuel output 8)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / pink.
Battery power
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Red.
Power ground 1
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Black.
Sensor ground
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Grey.
Crank sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Black screened red.
Timing ground
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: not given.
Coolant temperature sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / violet.
MAP2
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / yellow.
Cam sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Red screened red.
IGN2 (ignition output 2)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / grey.
IGN4 (ignition output 4)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / orange.
IGN5 (ignition output 5)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / green.
FUEL6 (fuel output 6)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / violet.
FUEL1 (fuel output 1)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / black.
FUEL5 (fuel output 5)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / green.
MAP1
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Blue / white.
Power ground 2
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Black.
FUEL7 (fuel output 7)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / grey.
Air temperature sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / green.
Knock sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Blue.
Oxygen sensor 2
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / orange.
IGN3 (ignition output 3)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Yellow / red.
HIGHSIDE2 (high-side output 2)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Blue / grey.
FUEL4 (fuel output 4)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / orange.
FUEL2 (fuel output 2)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / yellow.
Unknown function
Cavity: Unknown
Unknown

Omex OMEM710 hardware manual 2v11, section 29.2

No function listed in the manual.
HIGHSIDE1 (high-side output 1)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Blue / black.
FUEL3 (fuel output 3)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Brown / red.
Oxygen sensor 1
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / red.
Throttle position sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Orange.
5 V sensor supply out
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Pink.
Road speed sensor
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Red / blue.
ALT POWER (as named in the manual)
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: White / pink.
Tacho
Cavity: Populated
Confirmed

Omex OMEM710 hardware manual 2v11, section 29.2

Loom colour: Blue / yellow.