Removed text is struck through; added text is highlighted.
MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
VehicleEngine codeYearLSU sensorNoteNissan Silvia S14ASR20DET1993 - 1999External sensor neededMake sure of the correct engine code since this model might use different enginesNissan Silvia S15SR20DET1992 - 2002External sensor neededMake sure of the correct engine code since this model might use different engines
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1Wide band (VREF)2Wide band (VS)3Wide band (shield)4Wide band (H-)5INJ 8OutputNot available on MaxxECU STREET6-7-8GPO 7/DIN 3Output or digital inputNot available on MaxxECU STREET9Wide band (IP)10Wide band (RCAL)11+12VOutput12+12VOutput13Engine GND14AIN 1temperature input15AIN 2temperature input16AIN 30-5V analog input
The 16-pin extra connector, the wideband sensor connector and the 3-pin analogue input connector are redrawn as a structured pinout in MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapter connector pinout.
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Nissan S14A/S15 SR20 (64-pin) adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapterMaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Nissan Silvia S14A
SR20DET
1993 - 1999
External sensor needed
Make sure of the correct engine code since this model might use different engines
Nissan Silvia S15
SR20DET
1992 - 2002
External sensor needed
Make sure of the correct engine code since this model might use different engines
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
STREET
V1/RACE/PRO
Fuel pump
INJ 5
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Boost solenoid
GPO 1
Yes
Yes
VCT solenoid
GPO 3
Yes
Yes
Engine fan
INJ 6
Yes
Yes
Vehicle speed
DIN 1
Yes
Yes
AC request
DIN 2
Yes
Yes
AC fan
INJ 7
No
Yes
Error light
GPO 5
No
Yes
Idle solenoid
GPO 6
No
Yes
AC
GPO 4
No
Yes
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 3: MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapterMaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Nissan S14A/S15 SR20 (64-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Nissan Silvia S14A
SR20DET
1993 - 1999
External sensor needed
Make sure of the correct engine code since this model might use different engines
Nissan Silvia S15
SR20DET
1992 - 2002
External sensor needed
Make sure of the correct engine code since this model might use different engines
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
STREET
V1/RACE/PRO
Fuel pump
INJ 5
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Boost solenoid
GPO 1
Yes
Yes
VCT solenoid
GPO 3
Yes
Yes
Engine fan
INJ 6
Yes
Yes
Vehicle speed
DIN 1
Yes
Yes
AC request
DIN 2
Yes
Yes
AC fan
INJ 7
No
Yes
Error light
GPO 5
No
Yes
Idle solenoid
GPO 6
No
Yes
AC
GPO 4
No
Yes
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.