Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Bosch
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Identity and evidence

FG Technology describes Bosch VD1CP110 as an AdBlue control unit on Ford and Volkswagen diesel applications. Magicmotorsport lists Ford Ranger IV and Tourneo Custom II examples and identifies TC375 in its tool protocol. This is a separate VD1 catalogue family, not a DCU17 variant.

Open the catalogue identity for its recorded identifiers and applications. The catalogue label is an identification lead; confirm the physical part and software before assuming compatibility.

System context

For the difference between the dosing controller, supply pump and dosing module, see Bosch DCU dosing control. Tool-reported microcontrollers are vendor identifications; no firmware or chip marking was examined for this entry.

Further application listing

A calibration-file vendor lists a Ford Transit "DCU/VD1" entry with ECU Bosch VD1CP110 (ECU number P2064_VD1CP110_C045). This is a single file-vendor label with low confidence; it does not state a processor. The Magicmotorsport tool listings add that the unit can be accessed through the ECM connector when OBD access is not used, without publishing a pin assignment.

Sources