Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Bosch EDC16UC40
Applies to
Bosch EDC16UC40
Tool groups
None
Manufacturers
Bosch

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Scope

This page lists the bench-connection pins of the Bosch EDC16UC40 variant that a tool vendor labels XROM MPC562 EGPT DEUTZ. The vendor diagram names six pins on the ECU connector: pin 2 as ground, pins 5 and 28 as +12 V, pin 25 as K-line, and pins 75 and 12 as GPT0 and GPT1. Pin numbering is as printed in that diagram. The remaining pins of the connector are not given by the source.

The diagram is a tool-vendor connection guide, so the functions are graded as suspected. It describes the Deutz EGPT variant with an MPC562; it does not establish that the same pins apply to other EDC16UC40 variants, such as the Yuchai and Dongfeng parts discussed on the hub page.

Redrawn diagram

Pin index of the six named pins; connector face layout is not redrawn. Diagram redrawn by Tuning Wiki from the ecu.design connection diagram.

Sources

ECU Design: Bosch EDC16UC40 XROM MPC562 EGPT DEUTZ, tool-vendor connection diagram 1672 (Dimsport adapter set). Accessed 19 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Bosch EDC16UC40 bench connection pinout

Scope

This page lists the bench-connection pins of the Bosch EDC16UC40 variant that a tool vendor labels XROM MPC562 EGPT DEUTZ. The vendor diagram names six pins on the ECU connector: pin 2 as ground, pins 5 and 28 as +12 V, pin 25 as K-line, and pins 75 and 12 as GPT0 and GPT1. Pin numbering is as printed in that diagram. The remaining pins of the connector are not given by the source.

The diagram is a tool-vendor connection guide, so the functions are graded as suspected. It describes the Deutz EGPT variant with an MPC562; it does not establish that the same pins apply to other EDC16UC40 variants, such as the Yuchai and Dongfeng parts discussed on the hub page.

Redrawn diagram

Pin index of six bench-connection pins of the Bosch EDC16UC40 ECU connector
Pin index of the six named pins; connector face layout is not redrawn. Diagram redrawn by Tuning Wiki from the ecu.design connection diagram.

Sources

Connector pinout

Applicability

Selected bench-connection pins for the EDC16UC40 variant labelled XROM MPC562 EGPT DEUTZ in a tool-vendor connection diagram (ecu.design, Dimsport adapter). Only the six pins named in that diagram are listed; the full connector pinout and the applicability to other EDC16UC40 variants, including the Yuchai and Dongfeng parts on the hub, are not established. Tool-vendor source, so functions are suspected.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Bench connection (Deutz EGPT variant)
Instructions
Pins as shown in the cited tool-vendor connection diagram.
Equipment
Adapter harness shown in the cited diagram
Sources
ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)
Pins for Bench connection (Deutz EGPT variant)
Connector / pinConnection roleRecorded function
ECU connector (selected pins) / 2GroundGround (Suspected)
ECU connector (selected pins) / 5+12 V+12 V (Suspected)
ECU connector (selected pins) / 28+12 V+12 V (Suspected)
ECU connector (selected pins) / 12GPT1GPT1 (Suspected)
ECU connector (selected pins) / 25K-lineK-line (Suspected)
ECU connector (selected pins) / 75GPT0GPT0 (Suspected)

ECU connector (selected pins)

Redrawn pin index (face layout not shown in source)
View: Pin numbering as printed in the cited diagram; connector face orientation not verified
ECU connector (selected pins) — Redrawn pin index (face layout not shown in source). Pin numbering as printed in the cited diagram; connector face orientation not verified

Select a pin in a photograph or the index to highlight it.

ECU connector (selected pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Ground
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

+12 V
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

GPT1
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

K-line
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

+12 V
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

GPT0
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

Revision 1: Bosch EDC16UC40 bench connection pinout

Scope

This page lists the bench-connection pins of the Bosch EDC16UC40 variant that a tool vendor labels XROM MPC562 EGPT DEUTZ. The vendor diagram names six pins on the ECU connector: pin 2 as ground, pins 5 and 28 as +12 V, pin 25 as K-line, and pins 75 and 12 as GPT0 and GPT1. Pin numbering is as printed in that diagram. The remaining pins of the connector are not given by the source.

The diagram is a tool-vendor connection guide, so the functions are graded as suspected. It describes the Deutz EGPT variant with an MPC562; it does not establish that the same pins apply to other EDC16UC40 variants, such as the Yuchai and Dongfeng parts discussed on the hub page.

Redrawn diagram

Pin index of six bench-connection pins of the Bosch EDC16UC40 ECU connector
Pin index of the six named pins; connector face layout is not redrawn. Diagram redrawn by Tuning Wiki from the ecu.design connection diagram.

Sources

Connector pinout

Applicability

Selected bench-connection pins for the EDC16UC40 variant labelled XROM MPC562 EGPT DEUTZ in a tool-vendor connection diagram (ecu.design, Dimsport adapter). Only the six pins named in that diagram are listed; the full connector pinout and the applicability to other EDC16UC40 variants, including the Yuchai and Dongfeng parts on the hub, are not established. Tool-vendor source, so functions are suspected.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Bench connection (Deutz EGPT variant)
Instructions
Pins as shown in the cited tool-vendor connection diagram.
Equipment
Adapter harness shown in the cited diagram
Sources
ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)
Pins for Bench connection (Deutz EGPT variant)
Connector / pinConnection roleRecorded function
ECU connector (selected pins) / 2GroundGround (Suspected)
ECU connector (selected pins) / 5+12 V+12 V (Suspected)
ECU connector (selected pins) / 28+12 V+12 V (Suspected)
ECU connector (selected pins) / 12GPT1GPT1 (Suspected)
ECU connector (selected pins) / 25K-lineK-line (Suspected)
ECU connector (selected pins) / 75GPT0GPT0 (Suspected)

ECU connector (selected pins)

Redrawn pin index (face layout not shown in source)
View: Pin numbering as printed in the cited diagram; connector face orientation not verified
ECU connector (selected pins) — Redrawn pin index (face layout not shown in source). Pin numbering as printed in the cited diagram; connector face orientation not verified

Select a pin in a photograph or the index to highlight it.

ECU connector (selected pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Ground
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

+12 V
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

GPT1
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

K-line
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

+12 V
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)

GPT0
Cavity: Populated
Suspected

ecu.design connection diagram 1672 (EDC16UC40 XROM MPC562 EGPT DEUTZ)