Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Bosch ME3.1
Applies to
Bosch ME3.1
Tool groups
None
Manufacturers
None

Scope

This page gives the connector pin assignments of the Bosch Motronic ME3.1 injection and ignition control unit as printed in an Alfa Romeo eLearn service text. The unit has two 64-pin connectors, A and B. It is fitted in the engine compartment on the intake chamber, has a reprogrammable flash memory, and in this application controls an electronic throttle body, six injectors and six single ignition coils, four Lambda sensors, two knock sensors, CAN and K-line communication and the Alfa Romeo CODE immobiliser connection. The text is manufacturer service documentation, so functions are graded as confirmed for that Alfa Romeo application. The pin section does not name the vehicle or a Bosch part number.

Connector pinout

The source numbers pins as connector letter and cavity number (A1 to A64, B1 to B64). It does not show the physical face of the connectors or a viewing orientation, so each diagram is a numbered pin index only. Unconnected positions are shown greyed. Connector A carries the supply, CAN (A12, A29, A45, A61), K-line (A53), flash programming preparation (A20), accelerator pedal potentiometer, cruise control, fan and air-conditioning signals and the air flow meter. Connector B carries the throttle body motor and potentiometers, injector and coil outputs for cylinders 1 to 6, Lambda sensor signals and heaters and the knock and engine speed sensors. The printed list prints A31 twice (fuel pump relay feed and main relay activation) and omits A30; it also prints CAN-H against both A29 and A45; B61 is omitted. These entries are graded suspected or unknown. Diagrams redrawn by Tuning Wiki from the cited Alfa Romeo eLearn text.

Not established

Face layout and orientation of the connectors, the vehicle and Bosch part numbers to which this list applies, and the functions of A30 and B61.

Sources

Connector pinout

Applicability

Bosch Motronic ME3.1 as documented in an Alfa Romeo eLearn service text for a six-cylinder application with electronic throttle and Alfa Romeo CODE immobiliser (manufacturer service documentation). Model and Bosch part number not stated in the pin section.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Connector A (64 pins)

Redrawn pin index
View: Pin index as numbered in the cited source; physical face layout and viewing orientation not shown in source
Connector A (64 pins) — Redrawn pin index. Pin index as numbered in the cited source; physical face layout and viewing orientation not shown in source

Select a pin in a photograph or the index to highlight it.

Connector A (64 pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Cruise Control warning light
Cavity: Populated
Confirmed

Alfa eLearn

Fuel vapour solenoid valve operation
Cavity: Populated
Confirmed

Alfa eLearn

Alfa Romeo CODE connection
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Gear selector (auto. trans. only)
Cavity: Populated
Confirmed

Alfa eLearn

Compressor engagement request
Cavity: Populated
Confirmed

Alfa eLearn

Power supply for accelerator pedal potentiometer
Cavity: Populated
Confirmed

Alfa eLearn

Signal for potentiometer - 1 accelerator pedal
Cavity: Populated
Confirmed

Alfa eLearn

Quadrinary - Fan 1st speed request
Cavity: Populated
Confirmed

Alfa eLearn

Cruise Control ON/OFF
Cavity: Populated
Confirmed

Alfa eLearn

Automatic transmission version code
Cavity: Populated
Confirmed

Alfa eLearn

CAN-L line
Cavity: Populated
Confirmed

Alfa eLearn

Compressor relay control
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Direct supply
Cavity: Populated
Confirmed

Alfa eLearn

Supply controlled by ignition, via main relay
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Cruise Control warning light
Cavity: Populated
Confirmed

Alfa eLearn

Engine coolant overheating warning light
Cavity: Populated
Confirmed

Alfa eLearn

Preparation for Flash Programming
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Fuel level sensor
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Earth for potentiometer - 1 accelerator pedal
Cavity: Populated
Confirmed

Alfa eLearn

Earth for potentiometer - 2 accelerator pedal
Cavity: Populated
Confirmed

Alfa eLearn

Brake lights switch
Cavity: Populated
Confirmed

Alfa eLearn

Brake lights switch
Cavity: Populated
Confirmed

Alfa eLearn

SPORT function switch
Cavity: Populated
Confirmed

Alfa eLearn

CAN-H line
Cavity: Populated
Confirmed

Alfa eLearn

Unknown function
Cavity: Unknown
Unknown

Alfa eLearn

Not listed in source
Fuel pump relay feed / Main relay activation
Cavity: Populated
Suspected

Alfa eLearn

Source prints A31 twice and omits A30
Supply controlled by ignition, via main relay
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

SPORT function warning light
Cavity: Populated
Confirmed

Alfa eLearn

Rev counter signal
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Signal from air conditioner
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Signal for potentiometer - 2 accelerator pedal
Cavity: Populated
Confirmed

Alfa eLearn

Quadrinary - fan 2nd speed request
Cavity: Populated
Confirmed

Alfa eLearn

Cruise Control Resume
Cavity: Populated
Confirmed

Alfa eLearn

Cruise Control SET +
Cavity: Populated
Confirmed

Alfa eLearn

Speedometer sensor signal
Cavity: Populated
Confirmed

Alfa eLearn

CAN-H line
Cavity: Populated
Suspected

Alfa eLearn

Printed as CAN-H, as is A29; duplicate not resolved
Injection warning light
Cavity: Populated
Confirmed

Alfa eLearn

Supply controlled by ignition
Cavity: Populated
Confirmed

Alfa eLearn

Supply controlled by ignition, via main relay
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Operation of fan 1st speed
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Fuel consumption signal
Cavity: Populated
Confirmed

Alfa eLearn

Diagnostic connection (K line)
Cavity: Populated
Confirmed

Alfa eLearn

Air temperature sensor signal
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Supply for accelerator pedal potentiometer
Cavity: Populated
Confirmed

Alfa eLearn

Air flow meter signal
Cavity: Populated
Confirmed

Alfa eLearn

Cruise Control SET -
Cavity: Populated
Confirmed

Alfa eLearn

Clutch pedal switch
Cavity: Populated
Confirmed

Alfa eLearn

Oil pressure switch
Cavity: Populated
Confirmed

Alfa eLearn

CAN-L line
Cavity: Populated
Confirmed

Alfa eLearn

Operation of fan 2nd speed
Cavity: Populated
Confirmed

Alfa eLearn

Air flow meter supply
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Connector B (64 pins)

Redrawn pin index
View: Pin index as numbered in the cited source; physical face layout and viewing orientation not shown in source
Connector B (64 pins) — Redrawn pin index. Pin index as numbered in the cited source; physical face layout and viewing orientation not shown in source

Select a pin in a photograph or the index to highlight it.

Connector B (64 pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Throttle body motor earth
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor heating (pre-cat. 2) (front bank)
Cavity: Populated
Confirmed

Alfa eLearn

Operation of injector for cyl. 2
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Detonation sensor 2 reference earth
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor earth (pre-cat. 2)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Engine rpm sensor
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Lambda sensor earth (post-cat. 2)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Cylinder 3 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Cylinder 2 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Cylinder 1 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Throttle body motor supply
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor heater (post-cat. 2)
Cavity: Populated
Confirmed

Alfa eLearn

Operation of injector for cyl. 1
Cavity: Populated
Confirmed

Alfa eLearn

Operation of injector for cyl. 3
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Detonation sensor 1
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor signal (pre-cat. 1) (rear bank)
Cavity: Populated
Confirmed

Alfa eLearn

Potentiometer - 1 throttle body
Cavity: Populated
Confirmed

Alfa eLearn

Engine coolant temperature
Cavity: Populated
Confirmed

Alfa eLearn

Sensors reference earth
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Lambda sensor signal (post-cat. 1)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Cylinder 6 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Cylinder 5 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Cylinder 4 coil operation
Cavity: Populated
Confirmed

Alfa eLearn

Throttle body motor earth
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor heater (pre-cat. 1)
Cavity: Populated
Confirmed

Alfa eLearn

Operation of injector for cyl. 4
Cavity: Populated
Confirmed

Alfa eLearn

Operation of injector for cyl. 6
Cavity: Populated
Confirmed

Alfa eLearn

Operation of EGR solenoid valve (preparation)
Cavity: Populated
Confirmed

Alfa eLearn

Detonation sensor 2
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor signal (pre-cat. 2) (front bank)
Cavity: Populated
Confirmed

Alfa eLearn

Potentiometer 2 throttle body
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Timing sensor signal
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Lambda sensor signal (post-cat. 2)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Throttle body motor supply
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor heater (post-cat. 1)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Operation of injector for cyl. 5
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Detonation sensor 1 reference earth
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor earth (pre-cat. 1)
Cavity: Populated
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Throttle body potentiometers supply
Cavity: Populated
Confirmed

Alfa eLearn

Engine rpm sensor
Cavity: Populated
Confirmed

Alfa eLearn

Lambda sensor earth (post-cat. 1)
Cavity: Populated
Confirmed

Alfa eLearn

Unknown function
Cavity: Unknown
Unknown

Alfa eLearn

Not listed in source
Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn

Not connected
Cavity: Unused
Confirmed

Alfa eLearn