Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Bosch ML1.x
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Vehicles and engines in the Bosch application catalogue

The following listings are printed against this exact management designation in the Bosch Australia vehicle component applications catalogue. The dates are that catalogue's production window for the listing. They do not show that every market, body style or software version used the same ECU, and they do not establish a part number or pinout. Listings that printed more than one designation are omitted.

VehicleEngine codeBuild datesPrinted system
BMW 325 E30M20 B271985–1986Motronic (ML1.2)
BMW 525 E28M20 B271985–1986Motronic (ML1.2)

Source: Bosch Vehicle Component Applications, independent PDF mirror; accessed 2026-11-17.

Engine details

Both listings, January 1985 to November 1986, are six-cylinder 2.7-litre M20 B27 engines carrying the catalogue's [ETA] designation, with the car printed as 325 [e] and 525 [e]. The catalogue gives no Bosch control unit number for either listing and instead says to refer to BMW. The 325 [e] continues in the catalogue from December 1986 to December 1987 under a different system designation (Motronic M 1.1), so ML1.2 applies to the 1985–1986 listing only.

Not established

The processor, a Bosch control unit part number, and a published pinout.

Sources

  • Bosch Vehicle Component Applications. Manufacturer parts-application catalogue (Bosch Australia), independent PDF mirror; BMW 325 [e] and 525 [e], M20 B27 [ETA], Motronic (ML 1.2). Accessed 19 November 2026.

Indexed under Bosch ML1.x.