Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Bosch KE-Jetronic
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Vehicles and engines in the Bosch application catalogue

The following listing is printed as KE-Motronic (MK1.1) in the Bosch Australia vehicle component applications catalogue. The dates are that catalogue's production window. They do not show that every market or software version used the same ECU, and they do not establish a part number or pinout.

VehicleEngine codeBuild datesPrinted system
Audi 803A1988–1990KE-Motronic (MK1.1)

Source: Bosch Vehicle Component Applications, independent PDF mirror; accessed 2026-11-17.

Engine and control unit

For the Audi 80 3A listing (August 1988 to October 1990) the same catalogue gives a four-cylinder 2.0-litre engine and, in its component list, the control unit number 0 261 200 220. The catalogue is a parts-application listing, so the number identifies the Bosch part it assigns to that application, not a hardware or software revision. The catalogue prints separate fuel-system entries for the same car under KE-Jetronic, so the MK1.1 designation applies to the 3A listing only.

Not established

The processor, other vehicles using MK1.1, and the connector pinout.

Sources

  • Bosch Vehicle Component Applications. Manufacturer parts-application catalogue (Bosch Australia), independent PDF mirror; Audi 80 3A, KE-Motronic (MK 1.1), control unit 0 261 200 220. Accessed 19 November 2026.

Indexed under Bosch KE-Jetronic.