Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Simos 19
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Simos 19.8 is a Continental petrol engine-management variant listed for certain 2.0 TFSI plug-in hybrid applications. Tool suppliers list it separately from Simos 19.2 and 19.7. Confirm the fitted ECU, software and complete vehicle configuration before choosing a calibration or programming method.

Processor

AutoTuner's ECU compatibility export of 28 October 2026 lists the Infineon TC297 as the microcontroller of Simos 19.8. This is a tool-vendor listing, not manufacturer documentation, and it does not state the flash or EEPROM configuration.

Application and identification examples

AutoTuner's Simos 19.8 release names Audi 50 and 55 TFSI e 2.0 applications for its product. The release is a tool coverage statement, not a complete fitment list. The ECUFILES catalogue lists some A6, A7 and Q5 TFSI e examples, while showing more than one possible ECU family for some entries. A model or badge alone does not establish that 19.8 is fitted.

For an identification research example, Auto-Remap associates an A6 2.0 listing with 19.8 and 4K0906259G 0002, but the catalogue leaves hardware and software fields blank and labels this as a calibration/upgrade. TunerPad's listing uses the same number and version but calls 4K0906259G a hardware number and names VWSCW730 as software. These are sellers' descriptions, not verified interchangeability or proof of file contents. Record all ECU label, diagnostic and file identifiers and resolve the fields with the chosen tool before matching a definition; neither listing validates individual maps or a complete backup.

Engine and hybrid output

Audi Self-Study Programme 686, pages 24 and 26–27, provides a factory example: the EA888 evo4 2.0-litre DRYA hybrid engine is paired with Simos 19.8 in the Q5, A6 and A7 55 TFSI e examples it lists. Audi gives 195 kW combustion-engine output, 105 kW peak electric-motor output and 270 kW combined system output for this drive concept. The separate peak ratings cannot simply be added to establish total system output. This is a training example, not proof that every vehicle carrying the badge uses this ECU; confirm the actual identification and software.

The same programme describes the MLB TFSI e electric motor’s assistance as dependent on factors including drive mode, battery charge and temperature. Audi calls this electric assistance “boost”; it should not be confused with turbocharger boost pressure. Record these conditions for repeatable hybrid performance comparisons and check the actual vehicle’s operating mode. The programme notes that later model years and platforms can differ.

As separate vehicle context, Audi's 2024 A6 Sedan 55 TFSI e specification gives 195 kW for the petrol engine and 270 kW maximum system output for that vehicle. It does not identify its ECU variant or prove either seller listing is that same configuration. The example shows why a hybrid's advertised system power, engine-only output and measured wheel power must not be treated as identical. Record battery state, operating mode and test conditions alongside the ECU and transmission identification.

Read and write support

AutoTuner's release describes OBD virtual read and OBD write for its named 19.8 applications. bFlash V2610C, 29 October 2026 separately lists 19.2, 19.7 and 19.8 in a beta OBD virtual-read protocol for specified MLB Evo 2.0 TSI/TFSI hybrid applications, with a full-flash option on request. Its vehicle list groups the variants together. These are dated, product-specific claims: verify current coverage, operations, file format and recovery for the exact ECU and software with the provider.

A virtual read supplies a matching file and is not proof of the ECU's current contents or a full flash/EEPROM backup. Auto-Remap says its offered original file excludes a full backup and EEPROM. Retain the actual read and record its origin and scope, confirm checksum handling and a practical restoration path, and do not infer that a definition editor provides flashing support.

Calibration and logging

The references here do not supply validated map addresses, axis scaling, a universal safe target or a specific 19.8 calibration strategy. Match the exact software and definition, and validate map function before editing. Mk8 EA888 Evo4 maps and logging channels described elsewhere are not automatically applicable to this longitudinal hybrid.

After establishing a healthy baseline, compare repeatable tests with supported and correctly defined engine request and limit, boost target and actual, lambda, fuel pressure, ignition corrections and temperature channels. Record whether values are measured or modelled and the hybrid mode, battery state and transmission conditions. An engine ECU torque estimate alone cannot establish combined hybrid or wheel output; use suitable independent measurements when evaluating a change.

Sources