Scope
This page gives the ECU connector assignments of the Bosch MP5.1 multipoint Motronic as wired on the Peugeot 106 with the NFZ (TU5JP Z/L) engine. The source is a Peugeot-style wiring diagram titled "Bosch multipoint injection MP5.1" in which the control unit is item 1320 and its connector is a 55-way housing. The connector table of that diagram lists wires for 31 pins numbered between 1 and 37; other cavities are not populated in the table and are not drawn here.
The pin index below is a redrawn numbered grid. The source shows pin numbers but not the physical face layout of the housing, so the orientation and cavity positions are not established.
Connector pinout
Functions are taken from the components to which each wire is routed in the diagram. Where a wire number is shared with a harness splice or a connector, the wire number is quoted instead of a function. Evidence grade: suspected, because the diagram is a secondary copy of the workshop document. The pin assignments are not verified for other MP5.1 applications.
Diagram redrawn by Tuning Wiki from the Peugeot 106 NFZ wiring document.
Pins 2, 14, 19 and 26 are earth wires (wire numbers beginning with M run to earth points in the diagram). Pins 1 and 20 connect to the static ignition coil, pins 7, 12, 25, 27 and 29 to the pressure, temperature and throttle sensors, and pins 3 and 37 to the double relay 1304.
Sources
- Peugeot 106, engine NFZ (TU5JP Z/L), Bosch multipoint injection MP5.1: wiring diagrams, PDF printout dated 25 October 2013 of a Peugeot workshop wiring document; schematic pages 2 and 4. Accessed 19 November 2026.
Connector pinout
Peugeot 106 NFZ (TU5JP Z/L) Bosch Motronic MP5.1 only, from a wiring diagram reproduced from a Peugeot workshop document; only pins listed in the ECU 1320 connector table are included. Not verified for other MP5.1 applications such as the Citroen Xantia RFV. Evidence grade: suspected (secondary copy of OEM wiring diagram).
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
ECU connector (55-way housing, 31 listed pins)
View: Orientation as drawn in the cited source; not verified. Pin index - face layout not shown in source.
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Ignition coil 1135 control (wire 110, coil terminal 1) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Earth (wire M134, to splice EM12A / earth M13) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Multi-function double relay 1304 control (wire 1236, relay terminal 10) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Canister purge solenoid valve 1215 control (wire 1232) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Wire 426 to instrument-panel connector 8V JN, terminal 1 Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Manifold pressure sensor 1312 signal (wire 1355, sensor terminal 3) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Wire 1360 to vehicle speed sensor 1620; wire 465 to tachometer 4210 (two wires on this pin) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Oxygen sensor 1350 connection (wire 131, sensor terminal 3) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Engine speed sensor 1313 connection (wire 133, sensor terminal 2) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Wires 1350 and 1356 to throttle potentiometer 1317 terminal 1 and pressure sensor 1312 terminal 1 Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Wire 1339 (via splice E620 with wires 480, 142, 1338, 821) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Earth (wire M131, to splice EM12A / earth M13) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Idle-speed regulation solenoid valve 1239 control (wire 1231, valve terminal 3) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Injection-ignition test connector C1300 (wire 1337) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Injector control: wire 1320 to injector wires 1321-1324 (injectors 1331-1334) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Supply from double relay 1304 (wire BB12) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Earth (wire M123, to splice EM12B / earth M12) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Ignition coil 1135 control (wire 111, coil terminal 2) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Wire 480 to instrument-panel connector 8V JN, terminal 7, and splice E620 Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Air-conditioning compressor cut-off relay 8015 (wire 1234) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Coolant thermistor 1220 signal (wire 1235) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Sensor earth (wire M121, to splice EM02C) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Inlet air thermistor 1240 signal (wire 1243) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Oxygen sensor 1350 connection (wire 130, sensor terminal 4) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Throttle potentiometer 1317 signal (wire 1352, terminal 3) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Engine speed sensor 1313 connection (wire 132, sensor terminal 1) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Air-conditioning pressostat 8007 (wire 8078) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Idle-speed regulation solenoid valve 1239 control (wire 1230, valve terminal 1) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Passenger-compartment temperature electronic thermostat 8035 (wire 8053) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Coded anti-start keypad 8200 (wire 820) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |
||
| Multi-function double relay 1304 control (wire 1217, relay terminal 4) Cavity: Populated |
Suspected Peugeot 106 NFZ MP5.1 wiring diagram, ECU 1320 connector table |