Adaptronic M6000 is a standalone or earlier programmable engine-management system. Modular M6000 universal wire-in ECU. Manufacturer support archives the M6000 Rev2 diagram, its startup guide and Eugene software. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic M6000 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Connector pinout
A structured pinout with redrawn pin-index diagrams of connectors J1, J2, J3 and J4 (120 positions, manufacturer documentation) is on Adaptronic M6000 connector pinout. Diagram redrawn by Tuning Wiki from the Adaptronic M6000 wiring diagrams.
Manufacturer connector pinouts
Transcribed from the Adaptronic M6000 wiring diagrams in Haltech's archive. The source states all J3 and J4 positions are normally blank and not connected internally unless the appropriate modules are installed. Their listed functions are conditional on those modules; spare positions on J1, J3 and J4 may be allocated by the small modules shown on the final source sheet. Confirm fitted hardware before wiring. The diagrams require external ignition drivers or coils with built-in igniters; see the source for wiring orientation, wire colours, current limits, power supplies and ECU configuration.
J1 — 26-way
| Pin | Function in drawing |
|---|---|
| 1 | Injector 1 |
| 2 | Injector 2 |
| 3 | Injector 3 |
| 4 | Injector 4 |
| 5 | Injector 5 |
| 6 | Spare |
| 7 | Spare |
| 8 | Injector 6 |
| 9 | Ignition 1 |
| 10 | Ignition 2 |
| 11 | Ignition 3 |
| 12 | Ignition 4 |
| 13 | Spare |
| 14 | Injector 7 |
| 15 | Ignition 5 |
| 16 | Ignition 6 |
| 17 | Ignition 7 |
| 18 | Ignition 8 |
| 19 | Spare |
| 20 | Injector 8 |
| 21 | Auxiliary 1 |
| 22 | Auxiliary 2 |
| 23 | Auxiliary 3 |
| 24 | Auxiliary 4 |
| 25 | Spare |
| 26 | Spare |
J2 — 34-way
| Pin | Function in drawing |
|---|---|
| 1 | CAS 1 |
| 2 | CAS 2 |
| 3 | Internal MAP / IMAP |
| 4 | Fuel pressure |
| 5 | Engine coolant temperature |
| 6 | Servo |
| 7 | 12 V ECU supply |
| 8 | Power ground |
| 9 | Power ground |
| 10 | Sensor ground |
| 11 | CAS 3 |
| 12 | Exhaust manifold pressure / EMAP |
| 13 | Oil pressure |
| 14 | Manifold air temperature |
| 15 | CAN high |
| 16 | EFI / fuel pump relay |
| 17 | Ignition switch (source says need not be wired) |
| 18 | Oxygen 1 |
| 19 | Oxygen 2 |
| 20 | TPS 1 |
| 21 | Fuel temperature |
| 22 | External 0–5 V input 1 |
| 23 | CAN low |
| 24 | Vehicle speed sensor |
| 25 | Tachometer |
| 26 | Knock |
| 27 | 5 V sensor supply |
| 28 | TPS 2 |
| 29 | Oil temperature |
| 30 | External 0–5 V input 2 |
| 31 | Digital input 1 |
| 32 | Digital input 2 |
| 33 | Digital input 3 |
| 34 | Digital input 4 |
J3 — 26-way
| Pin | Function in drawing |
|---|---|
| 1 | Injector 9 |
| 2 | Injector 10 |
| 3 | Injector 11 |
| 4 | Injector 12 |
| 5 | Injector 13 |
| 6 | Spare / optional module |
| 7 | Spare / optional module |
| 8 | Injector 14 |
| 9 | Ignition 9 |
| 10 | Ignition 10 |
| 11 | Ignition 11 |
| 12 | Ignition 12 |
| 13 | Spare / optional module |
| 14 | Injector 15 |
| 15 | Ignition 13 |
| 16 | Ignition 14 |
| 17 | Ignition 15 |
| 18 | Ignition 16 |
| 19 | Spare / optional module |
| 20 | Injector 16 |
| 21 | Auxiliary output |
| 22 | Auxiliary output |
| 23 | Auxiliary output |
| 24 | Auxiliary output |
| 25 | Spare / optional module |
| 26 | Spare / optional module |
J4 — 34-way
| Pin | Function in drawing |
|---|---|
| 1 | Injector 17 |
| 2 | Injector 18 |
| 3 | Injector 19 |
| 4 | Injector 20 |
| 5 | Injector 21 |
| 6 | Spare / optional module |
| 7 | Spare / optional module |
| 8 | Spare / optional module |
| 9 | Spare / optional module |
| 10 | Injector 22 |
| 11 | Ignition 17 |
| 12 | Ignition 18 |
| 13 | Ignition 19 |
| 14 | Ignition 20 |
| 15 | Spare / optional module |
| 16 | CAN 2 high |
| 17 | Spare / optional module |
| 18 | Injector 23 |
| 19 | Ignition 21 |
| 20 | Ignition 22 |
| 21 | Ignition 23 |
| 22 | Ignition 24 |
| 23 | Spare / optional module |
| 24 | CAN 2 low |
| 25 | Spare / optional module |
| 26 | Injector 24 |
| 27 | Auxiliary output |
| 28 | Auxiliary output |
| 29 | Auxiliary output |
| 30 | Auxiliary output |
| 31 | Spare / optional module |
| 32 | Spare / optional module |
| 33 | Spare / optional module |
| 34 | Spare / optional module |