Adaptronic M2000 is a standalone or earlier programmable engine-management system. Modular M2000 universal wire-in ECU. Haltech's archive identifies the M2000 Rev2 pinout, startup guide and M2000/M6000 basemap; modules and software change the available configuration. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic M2000 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Connector pinout
A structured pinout with redrawn pin-index diagrams of the 26-way and 34-way connectors (60 positions, manufacturer documentation) is on Adaptronic M2000 connector pinout. Diagram redrawn by Tuning Wiki from the Adaptronic M2000 wiring diagrams.
Manufacturer connector pinouts
Transcribed from the Adaptronic M2000 wiring diagrams in Haltech's archive. The 26-way sheet is titled J1, while the connector drawing on that sheet says J2. To avoid resolving the inconsistency by assumption, the tables identify the connectors by position count; confirm the labels on the unit. Spare positions may depend on configuration. The diagrams require external ignition drivers or coils with built-in igniters; see the source for wiring orientation, wire colours, current limits, power supplies and ECU configuration.
26-way connector
| Pin | Function in drawing |
|---|---|
| 1 | Injector 1 |
| 2 | Injector 2 |
| 3 | Injector 3 |
| 4 | Injector 4 |
| 5 | Injector 5 |
| 6 | Spare |
| 7 | Spare |
| 8 | Injector 6 |
| 9 | Ignition 1 |
| 10 | Ignition 2 |
| 11 | Ignition 3 |
| 12 | Ignition 4 |
| 13 | Spare |
| 14 | Injector 7 |
| 15 | Ignition 5 |
| 16 | Ignition 6 |
| 17 | Ignition 7 |
| 18 | Ignition 8 |
| 19 | Spare |
| 20 | Injector 8 |
| 21 | Auxiliary 1 |
| 22 | Auxiliary 2 |
| 23 | Auxiliary 3 |
| 24 | Auxiliary 4 |
| 25 | Spare |
| 26 | Spare |
34-way connector
| Pin | Function in drawing |
|---|---|
| 1 | CAS 1 |
| 2 | CAS 2 |
| 3 | Internal MAP / IMAP |
| 4 | Fuel pressure |
| 5 | Engine coolant temperature |
| 6 | Servo |
| 7 | 12 V ECU supply |
| 8 | Power ground |
| 9 | Power ground |
| 10 | Sensor ground |
| 11 | CAS 3 |
| 12 | Exhaust manifold pressure / EMAP |
| 13 | Oil pressure |
| 14 | Manifold air temperature |
| 15 | CAN high |
| 16 | EFI / fuel pump relay |
| 17 | Ignition switch (source says need not be wired) |
| 18 | Oxygen 1 |
| 19 | Oxygen 2 |
| 20 | TPS 1 |
| 21 | Fuel temperature |
| 22 | External 0–5 V input 1 |
| 23 | CAN low |
| 24 | Vehicle speed sensor |
| 25 | Tachometer |
| 26 | Knock |
| 27 | 5 V sensor supply |
| 28 | TPS 2 |
| 29 | Oil temperature |
| 30 | External 0–5 V input 2 |
| 31 | Digital input 1 |
| 32 | Digital input 2 |
| 33 | Digital input 3 |
| 34 | Digital input 4 |