Vehicles and engines in the Bosch application catalogue
The following listings are printed against this exact management designation in the Bosch Australia vehicle component applications catalogue. The dates are that catalogue's production window for the listing. They do not show that every market, body style or software version used the same ECU, and they do not establish a part number or pinout. Listings that printed more than one designation are omitted. A chassis-only continuation line is kept with the model printed on the line above it.
| Vehicle | Engine code | Build dates | Printed system |
|---|---|---|---|
| Mercedes-Benz 300 W124 | M103.983 | 1986–1992 | KE-Jetronic (KE3.1) |
| Mercedes-Benz 420 W126 | M116.965 | 1985–1991 | KE-Jetronic (KE3.1) |
| Mercedes-Benz 560 W126/107 | M117.968 | 1985–1991 | KE-Jetronic (KE3.1) |
Source: Bosch Vehicle Component Applications, independent PDF mirror; accessed 2026-11-17.
ECU and connector
The jetronic.org enthusiast reference describes KE3-Jetronic from 1986 as a digital ECU with configuration switches that change the engine map, basic diagnostic functions and on-board air-fuel and idle control. It gives KE3.1 a 25-pin connector (different from the KE1 and KE2 connector) and KE3.2 a 35-pin connector, and names the Mercedes-Benz W124 300 E as the first car. A forum post claims all KE controllers have 25 pins; that is the weaker source and conflicts with the 35-pin KE3.2 statement. Neither source names the microcontroller, and no pinout was found. Single-source, unverified against Bosch documentation.
Indexed under Bosch KE-Jetronic.
Sources
- jetronic.org, Overview Bosch Jetronic; enthusiast reference. Accessed 19 November 2026.
- PeachParts forum, CIS-E pin-outs; owner post. Seen in a search summary on 19 November 2026; not opened.