Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Autronic standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Autronic SM4DC is a standalone or earlier programmable engine-management system. SM4 dual-calibration version provides switch-selectable calibrations. Autronic identifies pin 39 as calibration select instead of the normal HSI3 function. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Processor

Autronic's SM4 product page (manufacturer documentation) gives a 16-bit Intel microcontroller running at 20 MHz. The exact part number is not stated in the sources checked.

Engine applications

The SM4DC is a universal ECU, not tied to specific vehicles. Autronic positions the SM4 family primarily for high-performance motorsport, with road-car use restricted where emission rules apply, and supports most reciprocating engines of 1 to 16 cylinders plus two-rotor rotary engines. Manned-aircraft use is prohibited. No engine codes are listed by the manufacturer.

Connector pinout

The 42-position function table is on the Autronic SM4 connector pinout page, which covers the SM4, SM4DC and SM4 Marine versions with the standard SM4 loom (manufacturer documentation; diagram redrawn by Tuning Wiki). On this dual-calibration version pin 39 selects calibration rather than HSI3. Use the original connector drawing for orientation and output limitations.

Further information

Sources