Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Bosch M1.1
Applies to
Bosch M1.1
Tool groups
None
Manufacturers
BMW

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Scope

The BMW E30 325i-type installation of Bosch Motronic M1.1 uses a 55-pin connector between the ECU and the engine harness. The pin functions below come from a single community table; no Bosch or BMW document confirms them, so every function is graded suspected. Pin numbers with no published function are left blank. The same page states that Motronic 1.3 reuses this loom and plug with a few extra wires; see the M1.3 pinout for its table, which also lists wire colours.

Connector

The source describes the plug as fitting 55 pins in three rows, with pin 1 at the end furthest from the cable. It does not give the connector face in text, so the diagram is a numbered pin index only. Viewing orientation is not verified. Diagram redrawn by Tuning Wiki from the cited source.

Pin index (face layout not shown in source).

Not established

Physical pin positions, the ECU-side housing part number, wire colours for this version, and the functions of pins 9, 11, 20, 21, 25, 29, 30, 33 to 35, 38, 41, 43, 46, 49 to 51 and 54 are not given.

Sources

E30 Zone Wiki, ECU Pinouts, Motronic 1.1 table, community wiki, revision of 28 February 2015. Accessed 19 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Bosch Motronic M1.1 connector pinout

Scope

The BMW E30 325i-type installation of Bosch Motronic M1.1 uses a 55-pin connector between the ECU and the engine harness. The pin functions below come from a single community table; no Bosch or BMW document confirms them, so every function is graded suspected. Pin numbers with no published function are left blank. The same page states that Motronic 1.3 reuses this loom and plug with a few extra wires; see the M1.3 pinout for its table, which also lists wire colours.

Connector

The source describes the plug as fitting 55 pins in three rows, with pin 1 at the end furthest from the cable. It does not give the connector face in text, so the diagram is a numbered pin index only. Viewing orientation is not verified. Diagram redrawn by Tuning Wiki from the cited source.

Pin index of the 55-pin Bosch Motronic M1.1 harness connector
Pin index (face layout not shown in source).

Not established

Physical pin positions, the ECU-side housing part number, wire colours for this version, and the functions of pins 9, 11, 20, 21, 25, 29, 30, 33 to 35, 38, 41, 43, 46, 49 to 51 and 54 are not given.

Sources

Connector pinout

Applicability

BMW E30 325i-type (M20) 55-pin Motronic harness connector as tabulated by the E30 Zone community wiki; single community source, not manufacturer documentation, so all functions are suspected. Pin numbers without a listed function are left blank.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Engine harness connector (55-pin)

Pin index (face layout not shown in source)
View: Pin index only; physical face layout and viewing orientation not verified.
Engine harness connector (55-pin) — Pin index (face layout not shown in source). Pin index only; physical face layout and viewing orientation not verified.

Select a pin in a photograph or the index to highlight it.

Engine harness connector (55-pin) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Timing Control - to coil and O2 sensor
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Fuel pump relay control
Cavity: Populated
Suspected

E30 Zone Wiki

Idle speed control
Cavity: Populated
Suspected

E30 Zone Wiki

Evaporative purge valve
Cavity: Populated
Suspected

E30 Zone Wiki

Engine Speed output- to instrument cluster
Cavity: Populated
Suspected

E30 Zone Wiki

AFM input - pin 2
Cavity: Populated
Suspected

E30 Zone Wiki

Cylinder ID sensor input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

O2 sensor ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM reference output- pin 3
Cavity: Populated
Suspected

E30 Zone Wiki

RXO - diagnostic plug
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Check engine light - to cluster
Cavity: Populated
Suspected

E30 Zone Wiki

Injectors 1,3,5
Cavity: Populated
Suspected

E30 Zone Wiki

Injectors 2,4,6
Cavity: Populated
Suspected

E30 Zone Wiki

Power input main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Idle speed control
Cavity: Populated
Suspected

E30 Zone Wiki

O2 sensor heater
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM common- ground pin 4
Cavity: Populated
Suspected

E30 Zone Wiki

Start input- to ignition switch and coil
Cavity: Populated
Suspected

E30 Zone Wiki

O2 input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Cylinder ID sensor input
Cavity: Populated
Suspected

E30 Zone Wiki

Econometer
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Power input - to main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Programming voltage - Diagnostic Plug
Cavity: Populated
Suspected

E30 Zone Wiki

A/C on input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Park/ neutral input (auto only)
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM air inlet temp- pin 1
Cavity: Populated
Suspected

E30 Zone Wiki

Coolant Temp input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Engine speed input
Cavity: Populated
Suspected

E30 Zone Wiki

Engine speed input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Closed throttle input - pin 1
Cavity: Populated
Suspected

E30 Zone Wiki

WOT input - pin 3 Note: TPS pin 2 is ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

TXD - diagnostic plug
Cavity: Populated
Suspected

E30 Zone Wiki

Revision 1: Bosch Motronic M1.1 connector pinout

Scope

The BMW E30 325i-type installation of Bosch Motronic M1.1 uses a 55-pin connector between the ECU and the engine harness. The pin functions below come from a single community table; no Bosch or BMW document confirms them, so every function is graded suspected. Pin numbers with no published function are left blank. The same page states that Motronic 1.3 reuses this loom and plug with a few extra wires; see the M1.3 pinout for its table, which also lists wire colours.

Connector

The source describes the plug as fitting 55 pins in three rows, with pin 1 at the end furthest from the cable. It does not give the connector face in text, so the diagram is a numbered pin index only. Viewing orientation is not verified. Diagram redrawn by Tuning Wiki from the cited source.

Pin index of the 55-pin Bosch Motronic M1.1 harness connector
Pin index (face layout not shown in source).

Not established

Physical pin positions, the ECU-side housing part number, wire colours for this version, and the functions of pins 9, 11, 20, 21, 25, 29, 30, 33 to 35, 38, 41, 43, 46, 49 to 51 and 54 are not given.

Sources

Connector pinout

Applicability

BMW E30 325i-type (M20) 55-pin Motronic harness connector as tabulated by the E30 Zone community wiki; single community source, not manufacturer documentation, so all functions are suspected. Pin numbers without a listed function are left blank.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Engine harness connector (55-pin)

Pin index (face layout not shown in source)
View: Pin index only; physical face layout and viewing orientation not verified.
Engine harness connector (55-pin) — Pin index (face layout not shown in source). Pin index only; physical face layout and viewing orientation not verified.

Select a pin in a photograph or the index to highlight it.

Engine harness connector (55-pin) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Timing Control - to coil and O2 sensor
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Fuel pump relay control
Cavity: Populated
Suspected

E30 Zone Wiki

Idle speed control
Cavity: Populated
Suspected

E30 Zone Wiki

Evaporative purge valve
Cavity: Populated
Suspected

E30 Zone Wiki

Engine Speed output- to instrument cluster
Cavity: Populated
Suspected

E30 Zone Wiki

AFM input - pin 2
Cavity: Populated
Suspected

E30 Zone Wiki

Cylinder ID sensor input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

O2 sensor ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM reference output- pin 3
Cavity: Populated
Suspected

E30 Zone Wiki

RXO - diagnostic plug
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Check engine light - to cluster
Cavity: Populated
Suspected

E30 Zone Wiki

Injectors 1,3,5
Cavity: Populated
Suspected

E30 Zone Wiki

Injectors 2,4,6
Cavity: Populated
Suspected

E30 Zone Wiki

Power input main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Idle speed control
Cavity: Populated
Suspected

E30 Zone Wiki

O2 sensor heater
Cavity: Populated
Suspected

E30 Zone Wiki

Ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM common- ground pin 4
Cavity: Populated
Suspected

E30 Zone Wiki

Start input- to ignition switch and coil
Cavity: Populated
Suspected

E30 Zone Wiki

O2 input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Cylinder ID sensor input
Cavity: Populated
Suspected

E30 Zone Wiki

Econometer
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Power input - to main relay
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Programming voltage - Diagnostic Plug
Cavity: Populated
Suspected

E30 Zone Wiki

A/C on input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Park/ neutral input (auto only)
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

AFM air inlet temp- pin 1
Cavity: Populated
Suspected

E30 Zone Wiki

Coolant Temp input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Engine speed input
Cavity: Populated
Suspected

E30 Zone Wiki

Engine speed input
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

Closed throttle input - pin 1
Cavity: Populated
Suspected

E30 Zone Wiki

WOT input - pin 3 Note: TPS pin 2 is ground
Cavity: Populated
Suspected

E30 Zone Wiki

Unknown function
Cavity: Unknown
Unknown

E30 Zone Wiki

TXD - diagnostic plug
Cavity: Populated
Suspected

E30 Zone Wiki