
AEM Infinity 710 (manufacturer part 30-7100) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.
Identification and capability
| Manufacturer specification | Infinity 710 |
|---|---|
| Maximum cylinders, as listed | 10 |
| Sequential injector outputs | 10 high- or low-impedance |
| Ignition | 10 logic-level |
| Connector positions | 129 |
| Electronic throttle | Dual |
| CAN channels | 2 |
| Internal wideband channels | 2 |
Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.
Processor
AEM and Holley marketing text describes the Infinity family as built around a 32-bit floating-point, 200 MHz automotive processor rated at 400 MIPS, running a real-time operating system, with a separate power-management processor behind the permanent battery power inputs. A 2011 trade-press report on the Infinity-10 (the earlier name of this model) adds a math co-processor. These are vendor claims; the silicon vendor and part number are not named in the sources checked, so the MCU family is not established.
Engine applications
The Infinity 710 is a universal standalone ECU for engines of up to ten cylinders. AEM's Series 7 hardware specification includes example system schematics for a 1995 BMW E36 M3, Mitsubishi Lancer Evolution VIII and IX, a 1993-1998 Toyota Supra 2JZ-GTE and a GM LS3 drive-by-wire installation (manufacturer documentation). Retailer listings also offer a 710 package for the Nissan 350Z/G35 (seen in search summary only; vendor claim).
Connector and wiring
AEM's Infinity 710 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.
Connector pinout
The 129 positions are split between a 73-pin C1 and a 56-pin C2 connector. The full assignment (manufacturer documentation) is on the AEM Infinity 708, 710 and 712 connector pinout page. The source gives no connector face view, so the diagrams are numbered pin indexes. Diagram redrawn by Tuning Wiki from the AEM Series 7 hardware specification.
Further documents
- Manufacturer wiring and hardware specifications
- AEM Infinity user manual and comparison
- AEM engine management support and application harnesses
- AEM manufacturer index
Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.
AEM formerly called this Infinity-10; it listed part numbers 30-7100, 30-7105 and 30-7107. AEM model-name change announcement.
Sources
- Infinity Hardware Specification 30-7100/7101/7111. AEM manufacturer document, build 13 April 2017. Accessed 19 November 2026.
- AEM Performance Electronics Infinity Series 7 ECU. Trade press repeating AEM's processor description. Accessed 19 November 2026.
- SEMA 2011: AEM's Infinity EMS System Redefines Standalones. Trade press, 2011; seen in search summary only. Accessed 19 November 2026.