Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
AEM Performance Electronics standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
AEM Infinity family ECU marketing image
AEM Infinity ECU family illustration, showing multiple models; not necessarily Infinity 308. Image: AEM / Holley, reproduced with permission.

AEM Infinity 308 (manufacturer part 30-7113) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.

Identification and capability

Manufacturer specificationInfinity 308
Maximum cylinders, as listed8
Sequential injector outputs8 high-impedance; 2 low-impedance
Ignition8 logic plus distributor coil driver
Connector positions73
Electronic throttleNo
CAN channels1
Internal wideband channels0

Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.

Processor

Retailer listings reproducing AEM's product description state that the Infinity range is built around a 32-bit floating-point automotive processor running at 200 MHz and rated at 400 MIPS (vendor claim). Neither those listings nor AEM's hardware specification name the manufacturer or part number of the processor, so the exact microcontroller is not established.

Engine applications

The 308 is a universal ECU rather than a vehicle-specific unit. AEM lists it for engines of up to eight cylinders, with sequential high-impedance injection (two low-impedance injector drivers are also provided) and 0-5 V ignition triggers for use with external igniters or coils with built-in drivers. Engine codes are defined by the installer's configuration and no factory engine list exists.

Connector and wiring

AEM's Infinity 308 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.

Connector pinout

The full 73-position C1 pin table with a redrawn pin-index diagram is on AEM Infinity 308 connector pinout (manufacturer documentation; diagram redrawn by Tuning Wiki).

Further documents

Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.

Sources