This page lists which injection pump and injector family is documented for common Peugeot and Citroën (PSA) diesel engines. Most entries come from parts-catalogue fitment lists and service documents rather than a single factory application table, so each row is graded. Always confirm against the plate on your own pump, the stamped number on the injector bodies and the engine code before ordering parts or changing a calibration.
How to read the evidence column
- Service document: a workshop or training document describes the system for that engine.
- Catalogue: a parts supplier lists the part against that engine code. It shows what the supplier sells for it, not that every car left the factory with that part.
- Anecdotal: owner or forum report; use only as a lead.
Indirect-injection mechanical and electronic rotary pumps
| Engine | Typical vehicles | Pump listed | Evidence |
|---|---|---|---|
| XUD7 / XUD7TE (1.8) | 205, 309, 405 turbo, BX | Bosch VE; 0 460 484 038 (VE4/8F2150R403) is catalogued for BX 17 turbo and 405 1.8 turbo. Lucas DPC 8443B453D is catalogued for BX 1.7 TD / 405 XUD7TE. | Catalogue; Wikipedia says each XUD9 version used either a Bosch or Lucas mechanical pump |
| XUD9 / XUD9TE (1.9) | 306, 405, 406, 806, Xsara, ZX, Xantia, Berlingo, Partner, Expert | Bosch VE (D8B example pump XUD 212 R 513) or Lucas DPC. The XUD9BTF carries a semi-electronic Bosch VP20 (XUD BP 02 601) with advance solenoid and needle-lift sensor.Bosch VE numbers catalogued: 0 460 494 388 (405 1.9 D / TD / Turbo D), 0 460 494 427 (VE4/9F2250R601-2; 406 1.9 TD 90 PS and 806), 0 460 494 446 (VE4/9F2250R601-3; Xantia), 0 460 494 423 (VE4/9F2250R513-4; 806 and Expert).Lucas numbers catalogued: 8444B720A, 8444B720B, 8444B721B (306, ZX and 405 II estate 1.9 DT/TD/SRDT, 1992 to 2003) and 8444B730A, 8444B731A (Xantia and ZX). A Xantia XUD9SD DHW is reported with a fully mechanical Lucas R8445B250A. | Service document; catalogue; one owner report |
| XUD11ATE (2.1 turbo) | XM, 605 | Mechanical pump; Lucas DPC 8443B744B catalogued for XM 2.1 Turbo D XUD11ATE. Wikipedia lists a Bosch pump with throttle cable. | Conflicting: confirm by plate |
| XUD11BTE (2.1 turbo) | XM, 406, 605, Xantia | Lucas EPIC electronic rotary pump, ECU reference R04010011B on a 1996 XM. Owners report that a Bosch pump can replace it, but it needs the matching Bosch injectors, delivery pipes and drive sprocket (the Lucas sprocket may look similar but is not the same). Owners also say only pre-1996 XMs are a sure source of a Bosch pump, and that all Xantia 2.1s had the EPIC. | Service document; swap notes anecdotal |
| DK5 (2.5 turbo) | XM | Bosch VP36 with MSA11 7.6 ECU, Bosch controller 0281001336 | Service document |
| TUD5 1.5D (VJY, VJZ) | Saxo, 106 | Lucas DPC R8444 B/662C on one VJZ example; Snap-on lists Lucas or Bosch VP20 for VJY/VJZ. Bosch VE numbers catalogued for the 106 II 1.5D: 0 460 484 100 (VE4/8F2500R611-2), 0 460 484 138 (R611-5), 0 460 484 142 (R611-6) and 0 460 484 148 (R821). | Service document; catalogue; both makers listed |
| DW8 / DW8B (1.9 N/A, WJY and WJZ) | 206, 306, Partner, Berlingo, Xsara, Jumpy, Expert | Lucas/Delphi mechanical pump with electronic advance control (DCN2) and a needle-lift sensor on one injector. Owners also report a Bosch VE pump, 0 460 494 462 (VE4/9F2425R804), on a Berlingo, and a catalogue lists that number for the Partner 1.9 D. A Lucas pump marked R8448B182C / DPCDWLP12 is reported on a 206 WJZ, and R8445B350B on another car. Some Partner pumps carry a Lucas-stamped throttle sensor on a body plate reading Delphi. | Service document for the Lucas system; Bosch and plate details anecdotal or catalogue |
High-pressure pipes differ by pump make. An owner comparison lists the Lucas-pump DW8 pipe harness as 1570 81 (12 x 150, Expert) and the Bosch-pump Berlingo harness as 1570 87. Treat these as leads and check the pipe set against the pump actually fitted, since a different pipe set is also documented on the XUD9BTF with a needle-lift injector.
For timing figures, EPIC live-data parameters and boost-compensator (LDA) behaviour on these pumps, see the Peugeot and Citroën rotary pump diesel tuning guide.
Common-rail HDi: pump and injector families
| Engine / codes | Typical vehicles | High-pressure pump listed | Injectors listed | Evidence |
|---|---|---|---|---|
| DW10TD 2.0 HDi 8v (RHY, RHZ, RHX, RHS) | 206, 306, 307, 406, Xsara, Xantia, C5, Berlingo, Partner, Expert, Jumpy, 806 | Bosch CP1 0445010010 (alternatives 0445010162, 0445010282; OE references 1920 6X, 1920 CY, 96 320 137) | Bosch 0445110 series, for example 0445110008, 0445110044, 0445110057, 0445110076. 0445110057 (OEM 96384889, 96352463) is listed for RHS and RHW cars including the C8, Dispatch, Evasion, 806, 807 and Expert. | Catalogue |
| DW10ATED4 2.0 HDi 16v (RHW, RHT, RHM) | Evasion (RHW, 109 PS, 1999 to 2002), C8 (RHT, RHM), 806, 807, Expert, Dispatch | Not confirmed here. Supplier listings tie Siemens VDO injectors and a Bosch 0445110057 to this group, but I found no pump number against the RHW code. The RHS (DW10ATED, 107 PS) is listed for 307 SW and 607 and the RHZ (109 PS) for the 607. | Bosch 0445110057 listed for RHS and RHW cars | Catalogue |
| DW10 2.0 HDi 100 kW (RHR, RHK) | C4, C5, C8, 307, 407, 607, 807; some Ford, Volvo and Mazda | Siemens VDO 5WS40019 (also 1920QH, 1920N8, 9658193980, 9688153080). A Meat & Doria 78623R (OE 1920QH) is listed for the DW10BTED4 on the 307 estate and C5 II, and a VDO 5WS40809-Z for the C4 Grand Picasso DW10BTED4. | Siemens VDO / Continental, for example 5WS40156Z and A2C59511601 (supplier describes as DW10B) | Catalogue |
| DW10 2.0 HDi earlier Siemens SID801 cars | Partner, 307 | Siemens VDO 5WS40018 (also 9636818480) is sold for 307, 406, Partner, Berlingo, C5 and Xsara | Siemens | Catalogue: the supplier lists no engine code, so which RHY/RHZ cars used it is unconfirmed. An owner swap of a Siemens SID801 ECU, injectors and pump to a Bosch EDC15C2 set-up on a 2002 Partner RHY is documented online. |
| DW10C 2.0 HDi second generation | C5, 407, 508 and later | Not confirmed here. Searches for a DW10BTED4/DW10C pump number returned only generic Bosch CP1H3 variants, not a PSA fitment. | Delphi (28… and EMBR… series) | Catalogue (injecteurs-diesel.com) |
| DW10F 2.0 BlueHDi (DW10FC, FD, FE, FUC, FUD, FUE) | 308 T9, 508, 3008, 5008, Traveller, Expert, Boxer 3, Jumpy, SpaceTourer, C4 II, C4 Picasso, C5, DS4, DS5, DS 7; also Ford, Opel and Toyota versions | Synchronous single-piston pump, up to 2,000 bar depending on engine type, driven by the exhaust camshaft through a 1:2 gear cassette. NTN-SNR does not name the maker. A seller lists a Delphi HRP711 (OE 9674984480) against the DW10F family; this is a third-party listing, not manufacturer documentation. | Not confirmed here; ECU Delphi DCM7.1A on selected cars | NTN-SNR service note for the design; catalogue for the Delphi number |
| DV4TD 1.4 HDi 8v (8HX, 8HZ) | 206, 207, 307, C2, C3 | Siemens VDO 5WS40008Z (OE 1920 EP) is catalogued for 8HX/8HZ on C2, C3 and 206/207/307. Bosch CP1H3 and CP4S1 pumps are also listed against some 8HX applications. | Bosch listings 0445110075, 0445110135, 0445110252, 0445110339 appear on a supplier page, but it does not state which DV4 variants they fit | Catalogue; makers conflict, so confirm by plate |
| DV4TED4 1.4 HDi 16v (8HY) | C3, 1007 | Delphi 9643567280 / 9652615680 (also 1920ET, 1921N2, R9042Z021A) | Not confirmed here | Catalogue. Wikipedia also notes Siemens SID804/802 on most DV4 and SID805 on the lower-power C1/107 version, with Delphi DCR1400 on one variant. |
| DV6 1.6 HDi first generation (9HX, 9HY, 9HZ) | 206, 207, 307, 308, 407, 3008, Partner, Berlingo, C3, C4, Xsara Picasso; also Ford 1.6 TDCi and Volvo | Bosch CP1H 0445010296 (9HY/9HZ), alternative 0445010102. A PSA document describes a Bosch CP1-type 3-piston pump, belt driven at ratio 0.5. | Bosch, 90 hp: 0445110239 or 0445110311; 110 hp: 0445110259 or 0445110297. The 90 and 110 injectors share a body but the 110 nozzles flow more. | Service document; catalogue; tuner guide |
| DV6C 1.6 HDi (9HC, 9HD, 9HL, 9HR) | Berlingo B9, DS5, 2008 and other later 1.6 HDi 110/112/115 | VDO high-pressure pump, OEM code 1920RY (DiPa product HPP045N), listed for 9HR and 9HD | Siemens VDO / Continental, for example 9802448680 and 9674973080 (A2C59513556). The 9674973080 number is an injector, not a pump. | Catalogue |
| DV6 1.6 HDi in Expert and Jumpy (9HU DV6UTED4, 9HM DV6UC, 9HH DV6DUM) | Expert, Jumpy | A Bosch 0 445 010 552 (cross-references 0.986.437.430 and Meat & Doria 78620R) is listed against Expert and Jumpy II on a marketplace page, so treat it with caution. No firmer fitment was found. | Not confirmed here | Catalogue, weak |
| DV6DTED 1.6 HDi 92 hp (9HP) | C4 II, Berlingo B9, Partner | Bosch CP4 0445010516 is catalogued for a C3 II 1.6 HDi 68 kW; no 9HP-specific pump reference was found, and a further search turned up nothing that confirms it. The later 1.6 BlueHDi is reported with a Bosch CP4S1. | Not confirmed here | Catalogue, indirect |
| DV5 1.5 BlueHDi (DV5RC and variants) | 208, 308, 2008, 3008, 5008, 508, Partner, Berlingo | Pump model not confirmed. A Castrol technical page says the system works at up to 2,000 bar and uses an electronic suction valve (eSV) in place of the older ZME valve, plus a mechanical pressure limiter valve (PLV). The pump can fail if it runs dry, for example after irregular fuel-filter changes. | Not confirmed here; a source cites injector valves jamming after improper bleeding | Technical article; no pump number found |
| DW12 2.2 HDi (4HT, 4HS, 4HX, 4HW and Ford/Land Rover versions) | 406 coupé, 407, 607, 807, 4007, C5, C6; Jumper/Boxer | Bosch 0445010139 (OE 9660352980, 9683268980, 1920PH) is listed for 407 and 807 2.2 HDi at 115 or 125 kW. A Bosch CP1H3 R85/10-789S (OE 1920 KY, 1920 PH, Ford 1492204) is listed for the 607 and 807 4HT/4HS and 407 4HT. A Bosch CP1H 0445010298 appears in an aftermarket catalogue for a 110 hp 2.2, but the table is unclear. 0445010102 / 9656300380 is also sold for 2.2 applications but its data sheet names 206/C3, so treat it with caution. | Bosch 0445110036 listed for 2.2 HDi. Bosch 0445115025 is listed for 2.2 HDi 170 hp cars including the 407, 607 and C6. The same source as the first number contradicts itself and says newer 2.2 engines use Delphi. | Catalogue with conflicts |
| P22DTE 2.2 HDi (4HV 100 hp, 4HU 120 hp, 4HH 130 hp) in Boxer 3 and Relay III | Boxer, Relay (Ford-built Puma engine) | Denso DCRP300400 (OE 1920.KW, Ford 6C1Q-9B395-AD/AE) is listed for the 4HV 100 hp; a Meat & Doria 78718R is listed for the 4HU 120 hp; and a Denso HP3 294000-040x remanufactured unit is listed for 4HV, 4HU and 4HH. A Bosch CP1/S3/R75 listed for the Relay II is an earlier engine and not a match. | Not confirmed here | Catalogue. This is a different engine family from the DW12, so do not mix their pumps. |
| DT17 2.7 V6 HDi | 407, 607, C5, C6; Jaguar/Land Rover versions | Siemens VDO A2C20003757 / 4S7Q-9B395 is listed for 607, 407, 407 coupé and C6. Do not use Ford/Land Rover TDV6 pump listings as a cross-reference. | Siemens VDO / Continental; ECU SID201 | Catalogue. One listing calls the pump "mechanical", which is likely a catalogue error. |
| DT20 3.0 V6 HDi | 407, 607 and C6 late | Not confirmed here. Catalogue results for "3.0 HDi" also bring in Jumper/Boxer van parts such as a Bosch CP4 0445010559; those belong to a different 3.0 engine, so do not apply them to the V6. | Bosch listed; ECU EDC17CP11 | Catalogue |
Rules of thumb that do hold up
- Injector brands do not swap. A parts catalogue states that Bosch and Continental/Delphi injectors are not interchangeable even at the same power output. Read the code stamped on the injector body.
- Same body, different nozzle. On the 16v 1.6 HDi, the 90 hp and 110 hp injectors share a body but the 110 hp nozzles flow more. Injector part-number suffixes change calibration.
- Pump families follow ECU families. Bosch EDC15 / EDC16 cars generally pair with Bosch CP1/CP1H pumps; Siemens SID cars pair with Siemens VDO pumps. Do not assume the ECU can be swapped independently of the pump and injectors.
- One engine code can have more than one pump. Catalogues list Bosch and Siemens VDO pumps against the same 1.4 HDi code, several Bosch references against the 2.2, and both Lucas and Bosch pumps against the DW8. Match the number on the original pump, not just the engine code.
- The same displacement can be a different engine. The Boxer/Relay 2.2 (P22DTE) and the car DW12 2.2 use different pumps, as do the Jumper 3.0 and the 3.0 V6.
- A different pump make usually means different injectors, pipes and drive parts. This applies to Lucas-to-Bosch swaps on the 1.9 and 2.1 diesels.
- Common-rail pump setting varies. A PSA document states that its CP1-type three-piston pump is not a distributing pump and does not need setting. The DW10F single-piston pump is different: NTN-SNR says it must be locked at its own camshaft-pulley position (a 6 mm locking position, separate from the 8 mm timing position) before removal or when the cylinder head is disturbed. Wrong setting does not change rail pressure but quickly shortens timing-belt life.
Related pages
- Peugeot HDi injector and high-pressure pump tuning guide
- PSA HDi and BlueHDi diesel tuning guide (ECU identification)
- Peugeot Boxer and Citroën Relay diesel tuning guide
- Peugeot and Citroën rotary pump diesel tuning guide
- Bosch common-rail diesel injector part numbers
- Siemens and Continental injector part numbers
- Diesel injector catalogue
Sources
- Darwen Diesels: Bosch CP1 0445010010 fitment list (RHY, RHZ, RHX, RHS)
- Autotech24: Siemens VDO 5WS40019 (RHR, RHK)
- Darwen Diesels: Bosch CP1H 0445010296 (9HY, 9HZ)
- DiPa: VDO high-pressure pump for 1.6 HDi DV6C (1920RY)
- Autotech24: Bosch 0445010139 for 2.2 HDi
- Autotech24: Delphi 9643567280 for 1.4 HDi 16v 8HY
- Winparts: Siemens VDO 5WS40008Z for 1.4 HDi 8HX/8HZ
- Winparts: Denso HP3 pump for Boxer and Relay 2.2 (4HV, 4HU, 4HH)
- Classic Parts Finder: 2.7 HDi pump A2C20003757
- Castrol: BlueHDi diesel technical page (eSV, PLV, 2,000 bar)
- NTN-SNR: 2.0 BlueHDi DW10F timing-belt and pump-setting note (PDF)
- Autodoc: Bosch VE pump listings for 1.9 diesel (0 460 494 series)
- Autodoc: Bosch VE pump listings for the 106 1.5D (0 460 484 series)
- Berlingo DW8 fuel pump owner discussion (pump makers and pipe sets)
- 406 2.1 Bosch pump swap owner discussion
- Fuel system information for PSA HDi engines (PDF)
- Injecteurs-diesel.com: HDi injector families by engine
- HDI Tuning: 1.6 16v injector and turbo guide (PDF)
- Wikipedia: PSA XUD engine
- Wikipedia: PSA EW/DW engine
- Siemens-to-Bosch swap on a 2.0 HDi RHY (owner account)
Rows marked "not confirmed here" were not established by the sources found; they are gaps, not statements that no pump exists. Corrections with a plate photo or catalogue reference are welcome.