Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Renault Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Dacia, Renault

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Two different engines

"TCe" covers more than one family. An older 1.2 TCe uses a timing belt and is reported to have fewer serious faults. The later 1.2 TCe H5Ft (Clio IV, Captur, Megane III and IV, Kadjar and others) uses a timing chain and is the engine most often linked to problems. The 1.3 TCe (H5H) is a newer design that sources describe as noticeably more durable. Confirm the engine code before applying any advice.

Reported weak points (secondary sources)

H5Ft: oil consumption from the piston rings, timing chain stretch and thermostat failure appear in reliability databases, and a French review of the Scenic IV says the oil consumption fault is well documented and has led to class-action litigation in France. H5H: carbon build-up and timing chain issues are rated minor, with chain repair costs of about €500 to €1,000 quoted at roughly 100,000 to 160,000 km. The related Nissan 1.2 DIG-T shares architecture with the Renault TCe, and carbon build-up on its intake valves is a recorded concern.

These come from reliability aggregators and magazines, so they are rough guidance rather than measured failure rates.

Quoted stage 1 gains

CarClaim (one reseller) Captur 1.2 TCe 120 hp (2013 to 2017)About +14 hp Kadjar 1.2 TCe 130 hp (2015 to 2018)About +13 hp Clio IV phase 2 1.2 TCe 120 hp (2016 to 2019)About +11 hp

The figures are unverified listings. No Megane-specific gains or independent dyno data were found.

What is not known

No source examines whether a remap accelerates the oil consumption, timing chain or injector problems on these engines. Given the reported oil consumption on the H5Ft, a sensible precaution is to confirm oil level history and chain condition before changing the calibration, but that is a general caution and not a finding from the sources.

Sources

Chiptuningreseller: Captur 1.2 TCe, via search summary 2026-11-19. Chiptuningreseller: Kadjar 1.2 TCe, via search summary 2026-11-19. Chiptuningreseller: Clio 4 1.2 TCe, via search summary 2026-11-19. EngineScope: Renault Clio 1.2 TCe reliability, via search summary 2026-11-19. CarChecker: Renault Scenic 1.2 TCe Mk4, via search summary 2026-11-19. Auto Swiat: 1.2 TCe small Renault turbo engines, via search summary 2026-11-19.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Renault TCe petrol engines (H5Ft 1.2 and H5H 1.3) remap considerations

Two different engines

"TCe" covers more than one family. An older 1.2 TCe uses a timing belt and is reported to have fewer serious faults. The later 1.2 TCe H5Ft (Clio IV, Captur, Megane III and IV, Kadjar and others) uses a timing chain and is the engine most often linked to problems. The 1.3 TCe (H5H) is a newer design that sources describe as noticeably more durable. Confirm the engine code before applying any advice.

Reported weak points (secondary sources)

  • H5Ft: oil consumption from the piston rings, timing chain stretch and thermostat failure appear in reliability databases, and a French review of the Scenic IV says the oil consumption fault is well documented and has led to class-action litigation in France.
  • H5H: carbon build-up and timing chain issues are rated minor, with chain repair costs of about €500 to €1,000 quoted at roughly 100,000 to 160,000 km.
  • The related Nissan 1.2 DIG-T shares architecture with the Renault TCe, and carbon build-up on its intake valves is a recorded concern.

These come from reliability aggregators and magazines, so they are rough guidance rather than measured failure rates.

Quoted stage 1 gains

CarClaim (one reseller)
Captur 1.2 TCe 120 hp (2013 to 2017)About +14 hp
Kadjar 1.2 TCe 130 hp (2015 to 2018)About +13 hp
Clio IV phase 2 1.2 TCe 120 hp (2016 to 2019)About +11 hp

The figures are unverified listings. No Megane-specific gains or independent dyno data were found.

What is not known

No source examines whether a remap accelerates the oil consumption, timing chain or injector problems on these engines. Given the reported oil consumption on the H5Ft, a sensible precaution is to confirm oil level history and chain condition before changing the calibration, but that is a general caution and not a finding from the sources.

Sources

Revision 1: Renault TCe petrol engines (H5Ft 1.2 and H5H 1.3) remap considerations

Two different engines

"TCe" covers more than one family. An older 1.2 TCe uses a timing belt and is reported to have fewer serious faults. The later 1.2 TCe H5Ft (Clio IV, Captur, Megane III and IV, Kadjar and others) uses a timing chain and is the engine most often linked to problems. The 1.3 TCe (H5H) is a newer design that sources describe as noticeably more durable. Confirm the engine code before applying any advice.

Reported weak points (secondary sources)

  • H5Ft: oil consumption from the piston rings, timing chain stretch and thermostat failure appear in reliability databases, and a French review of the Scenic IV says the oil consumption fault is well documented and has led to class-action litigation in France.
  • H5H: carbon build-up and timing chain issues are rated minor, with chain repair costs of about €500 to €1,000 quoted at roughly 100,000 to 160,000 km.
  • The related Nissan 1.2 DIG-T shares architecture with the Renault TCe, and carbon build-up on its intake valves is a recorded concern.

These come from reliability aggregators and magazines, so they are rough guidance rather than measured failure rates.

Quoted stage 1 gains

CarClaim (one reseller)
Captur 1.2 TCe 120 hp (2013 to 2017)About +14 hp
Kadjar 1.2 TCe 130 hp (2015 to 2018)About +13 hp
Clio IV phase 2 1.2 TCe 120 hp (2016 to 2019)About +11 hp

The figures are unverified listings. No Megane-specific gains or independent dyno data were found.

What is not known

No source examines whether a remap accelerates the oil consumption, timing chain or injector problems on these engines. Given the reported oil consumption on the H5Ft, a sensible precaution is to confirm oil level history and chain condition before changing the calibration, but that is a general caution and not a finding from the sources.

Sources