Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
Triple_X's "Mean Green" is a 2010 2.5-litre Ford Focus RS Mk2 bought in August 2012. It runs 18 × 8.5-inch Rota Grid wheels, a Mountune airbox, a three-inch Mongoose exhaust and H&R lowering springs. The owner's final specification gives 360 metric hp and 510 Nm after mapping (owner-reported, no dyno sheet on the page).
Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.
Wheels
The first modification was a set of 18 × 8.5-inch Rota Grids. 3 mm rear spacers were added later to bring the wheels closer to the arch edges.
Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.
Intake, exhaust and power
In December 2012 the intake gained a Mountune airbox, K&N X-Stream filter and stainless charge pipe. By 5 May 2013 the car carried a three-inch Mongoose exhaust, downpipe and Forge dump valve. The final owner specification records 360 metric hp and 510 Nm after mapping.
Suspension
H&R springs were fitted on about 10 May 2013, with the owner measuring a drop of 35 mm at the front and 25 mm at the rear (owner-measured).
Sources
Garaget build thread: opening postGaraget build thread: Rota wheel installationGaraget build thread: intake componentsGaraget build thread: exhaust and dump-valve installationGaraget build thread: spring installation and measured drop reported by the ownerGaraget car page: owner's specification and photo gallery
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: Triple_X’s 2010 Ford Focus RS Mk2 “Mean Green”
Triple_X's "Mean Green" is a 2010 2.5-litre Ford Focus RS Mk2 bought in August 2012. It runs 18 × 8.5-inch Rota Grid wheels, a Mountune airbox, a three-inch Mongoose exhaust and H&R lowering springs. The owner's final specification gives 360 metric hp and 510 Nm after mapping (owner-reported, no dyno sheet on the page).

Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.
Wheels
The first modification was a set of 18 × 8.5-inch Rota Grids. 3 mm rear spacers were added later to bring the wheels closer to the arch edges.

Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.
Intake, exhaust and power
In December 2012 the intake gained a Mountune airbox, K&N X-Stream filter and stainless charge pipe. By 5 May 2013 the car carried a three-inch Mongoose exhaust, downpipe and Forge dump valve. The final owner specification records 360 metric hp and 510 Nm after mapping.
Suspension
H&R springs were fitted on about 10 May 2013, with the owner measuring a drop of 35 mm at the front and 25 mm at the rear (owner-measured).
Sources
Revision 3: Triple_X’s 2010 Ford Focus RS Mk2 “Mean Green”
Triple_X's "Mean Green" is a 2010 2.5-litre Ford Focus RS Mk2 bought in August 2012. It runs 18 × 8.5-inch Rota Grid wheels, a Mountune airbox, a three-inch Mongoose exhaust and H&R lowering springs. The owner's final specification gives 360 metric hp and 510 Nm after mapping (owner-reported, no dyno sheet on the page).

Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.
Wheels
The first modification was a set of 18 × 8.5-inch Rota Grids. 3 mm rear spacers were added later to bring the wheels closer to the arch edges.

Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.
Intake, exhaust and power
In December 2012 the intake gained a Mountune airbox, K&N X-Stream filter and stainless charge pipe. By 5 May 2013 the car carried a three-inch Mongoose exhaust, downpipe and Forge dump valve. The final owner specification records 360 metric hp and 510 Nm after mapping.
Suspension
H&R springs were fitted on about 10 May 2013, with the owner measuring a drop of 35 mm at the front and 25 mm at the rear (owner-measured).
Sources