Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Abarth, Fiat

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

This is a 2008 Fiat Grande Punto T-Jet Sport built in Brisbane with an Abarth 595 engine transplanted into it. It also has an Airtec front-mounted intercooler, BMC intake, Brembo brakes, Koni and Eibach suspension and 18-inch Abarth esseesse wheels.

Engine

The engine is paired with an Airtec front-mounted intercooler and BMC intake. The turbo still on the car at the time of the source posts was the standard IHI unit.

Chassis and wheels

The chassis combines Koni Special Active dampers, Eibach Pro springs, Brembo brakes and 18-inch Abarth esseesse wheels.

Instrument cluster

Fitting an Abarth instrument cluster proved more involved. The 2009 cluster in the 2008 car produced a speedometer fault, which led to a swap to a 2009 body control module (owner’s account).

Photos from Smoorebert on The FIAT Forum, reproduced with permission.

Sources

The FIAT Forum thread: engine swap, chassis parts and photosThe FIAT Forum thread: original engine and turbo specificationThe FIAT Forum thread: instrument cluster follow-up

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Smoorebert’s Abarth 595-powered Fiat Grande Punto

This is a 2008 Fiat Grande Punto T-Jet Sport built in Brisbane with an Abarth 595 engine transplanted into it. It also has an Airtec front-mounted intercooler, BMC intake, Brembo brakes, Koni and Eibach suspension and 18-inch Abarth esseesse wheels.

Engine

The engine is paired with an Airtec front-mounted intercooler and BMC intake. The turbo still on the car at the time of the source posts was the standard IHI unit.

Front view of the converted Grande Punto

Chassis and wheels

The chassis combines Koni Special Active dampers, Eibach Pro springs, Brembo brakes and 18-inch Abarth esseesse wheels.

Rear three-quarter view of the Grande Punto

Instrument cluster

Fitting an Abarth instrument cluster proved more involved. The 2009 cluster in the 2008 car produced a speedometer fault, which led to a swap to a 2009 body control module (owner’s account).

Photos from Smoorebert on The FIAT Forum, reproduced with permission.

Sources

Revision 2: Smoorebert’s Abarth 595-powered Fiat Grande Punto

This is a 2008 Fiat Grande Punto T-Jet Sport built in Brisbane with an Abarth 595 engine transplanted into it. It also has an Airtec front-mounted intercooler, BMC intake, Brembo brakes, Koni and Eibach suspension and 18-inch Abarth esseesse wheels.

Engine

The engine is paired with an Airtec front-mounted intercooler and BMC intake. The turbo still on the car at the time of the source posts was the standard IHI unit.

Front view of the converted Grande Punto

Chassis and wheels

The chassis combines Koni Special Active dampers, Eibach Pro springs, Brembo brakes and 18-inch Abarth esseesse wheels.

Rear three-quarter view of the Grande Punto

Instrument cluster

Fitting an Abarth instrument cluster proved more involved. The 2009 cluster in the 2008 car produced a speedometer fault, which led to a swap to a 2009 body control module (owner’s account).

Photos from Smoorebert on The FIAT Forum, reproduced with permission.

Sources