Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

This is a green 2.5-litre Ford Focus RS Mk2 demo car on orange wheels, built as a big-turbo project with a fabricated three-inch downpipe and large-bore pipework. The initial calibration was recorded on a graph, and a later turbo failure was attributed by the turbo supplier to overspeed.

The green demo RS on orange wheels. sas on PassionFord, reused with permission. Source post.

Engine and turbo

The specification lists forged pistons and rods, a modified Volvo exhaust manifold, a Sitech Racing inlet, 1,000 cc injectors and an Airtec intercooler. The downpipe is fabricated at three inches.

Large-bore pipework pictured in the opening build post. sas on PassionFord, reused with permission. Source post.

Wheels and tyres

The car ran 18-inch OZ wheels with 245/40 R888 tyres.

Turbo failure

After a turbo failure, photographs of the damaged downpipe were posted along with the turbo supplier’s diagnosis of overspeed (supplier’s diagnosis as relayed by the owner).

Sources

PassionFord build thread: opening build post and fabrication photosPassionFord build thread: engine, wheel and tyre specificationPassionFord build thread: downpipe damage and turbo supplier's diagnosis

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Simon’s Ford Focus RS Mk2 big-turbo demo car

This is a green 2.5-litre Ford Focus RS Mk2 demo car on orange wheels, built as a big-turbo project with a fabricated three-inch downpipe and large-bore pipework. The initial calibration was recorded on a graph, and a later turbo failure was attributed by the turbo supplier to overspeed.

The green demo RS on orange wheels

The green demo RS on orange wheels. sas on PassionFord, reused with permission. Source post.

Engine and turbo

The specification lists forged pistons and rods, a modified Volvo exhaust manifold, a Sitech Racing inlet, 1,000 cc injectors and an Airtec intercooler. The downpipe is fabricated at three inches.

Large-bore pipework pictured in the opening build post

Large-bore pipework pictured in the opening build post. sas on PassionFord, reused with permission. Source post.

Wheels and tyres

The car ran 18-inch OZ wheels with 245/40 R888 tyres.

Turbo failure

After a turbo failure, photographs of the damaged downpipe were posted along with the turbo supplier’s diagnosis of overspeed (supplier’s diagnosis as relayed by the owner).

Sources

Revision 2: Simon’s Ford Focus RS Mk2 big-turbo demo car

This is a green 2.5-litre Ford Focus RS Mk2 demo car on orange wheels, built as a big-turbo project with a fabricated three-inch downpipe and large-bore pipework. The initial calibration was recorded on a graph, and a later turbo failure was attributed by the turbo supplier to overspeed.

The green demo RS on orange wheels

The green demo RS on orange wheels. sas on PassionFord, reused with permission. Source post.

Engine and turbo

The specification lists forged pistons and rods, a modified Volvo exhaust manifold, a Sitech Racing inlet, 1,000 cc injectors and an Airtec intercooler. The downpipe is fabricated at three inches.

Large-bore pipework pictured in the opening build post

Large-bore pipework pictured in the opening build post. sas on PassionFord, reused with permission. Source post.

Wheels and tyres

The car ran 18-inch OZ wheels with 245/40 R888 tyres.

Turbo failure

After a turbo failure, photographs of the damaged downpipe were posted along with the turbo supplier’s diagnosis of overspeed (supplier’s diagnosis as relayed by the owner).

Sources