Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Alfa Romeo

This is a 2017 Alfa Romeo Giulietta 1.4 MultiAir, originally 150 CV, with a modified TD04L turbo, 390 cc injectors, air suspension and Koshi carbon bodywork. The owner reported 235 CV and 344 Nm on the dyno, and later reported 280 CV and 380 Nm after further engine changes (owner-reported figures).

Front three-quarter view of Marco’s black Giulietta

Carbon grille detail on Marco’s Giulietta

Photos shared by Marco13101978 on ClubAlfa.it and reproduced with permission.

Turbo and fuel system

The initial setup combined a modified TD04L turbo, with a revised compressor and enlarged wastegate port, with 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. The owner specified that the calibration was for 100-octane fuel. The dyno result was an owner-reported 235 CV and 344 Nm.

A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner's report.

Suspension and body

BC Racing coilovers were converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.

Sources