Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Land Rover
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
The "Range Racer" is a 4.2-litre supercharged Range Rover L322 converted for track use by Charlie, Ryan and Simone. The starting car is described by the owner as having 400 hp (the original supercharged engine specification) and weighing 2,640 kg. Changes so far are wider BMW X5 wheels, lowered air suspension and a first interior strip-out that the owner estimates removed more than 150 kg. A baseline outing was made at Bedford Autodrome before the modifications.
Wheels and suspension
BMW X5 wheels were sourced, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. The owner calculates that the smaller rolling diameter lowers the vehicle by 17 mm and shortens the gearing (owner calculation). Adjustable height-sensor links were used to lower the air suspension.
Reducing weight
The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. The owner estimates more than 150 kg was removed at that stage (estimate).
Photographs from the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs
Sources
PistonHeads build thread: project introductionPistonHeads build thread: Bedford benchmark and wheel and tyre updatePistonHeads build thread: air-suspension lowering updatePistonHeads build thread: first interior strip-out
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Charlie’s supercharged Range Rover “Range Racer”
The "Range Racer" is a 4.2-litre supercharged Range Rover L322 converted for track use by Charlie, Ryan and Simone. The starting car is described by the owner as having 400 hp (the original supercharged engine specification) and weighing 2,640 kg. Changes so far are wider BMW X5 wheels, lowered air suspension and a first interior strip-out that the owner estimates removed more than 150 kg. A baseline outing was made at Bedford Autodrome before the modifications.

Wheels and suspension
BMW X5 wheels were sourced, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. The owner calculates that the smaller rolling diameter lowers the vehicle by 17 mm and shortens the gearing (owner calculation). Adjustable height-sensor links were used to lower the air suspension.

Reducing weight
The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. The owner estimates more than 150 kg was removed at that stage (estimate).

Photographs from the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs
Sources
Revision 2: Charlie’s supercharged Range Rover “Range Racer”
The "Range Racer" is a 4.2-litre supercharged Range Rover L322 converted for track use by Charlie, Ryan and Simone. The starting car is described by the owner as having 400 hp (the original supercharged engine specification) and weighing 2,640 kg. Changes so far are wider BMW X5 wheels, lowered air suspension and a first interior strip-out that the owner estimates removed more than 150 kg. A baseline outing was made at Bedford Autodrome before the modifications.

Wheels and suspension
BMW X5 wheels were sourced, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. The owner calculates that the smaller rolling diameter lowers the vehicle by 17 mm and shortens the gearing (owner calculation). Adjustable height-sensor links were used to lower the air suspension.

Reducing weight
The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. The owner estimates more than 150 kg was removed at that stage (estimate).

Photographs from the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs
Sources