Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Reference
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Citroën, Peugeot

This page lists which injection pump and injector family is documented for common Peugeot and Citroën (PSA) diesel engines. Most entries come from parts-catalogue fitment lists and service documents rather than a single factory application table, so each row is graded. Always confirm against the plate on your own pump, the stamped number on the injector bodies and the engine code before ordering parts or changing a calibration.

How to read the evidence column

  • Service document: a workshop or training document describes the system for that engine.
  • Catalogue: a parts supplier lists the part against that engine code. It shows what the supplier sells for it, not that every car left the factory with that part.
  • Anecdotal: owner or forum report; use only as a lead.

Indirect-injection mechanical and electronic rotary pumps

EngineTypical vehiclesPump listedEvidence
XUD7 / XUD7TE (1.8)205, 309, 405 turbo, BXBosch VE; 0 460 484 038 (VE4/8F2150R403) is catalogued for BX 17 turbo and 405 1.8 turbo. Lucas DPC 8443B453D is catalogued for BX 1.7 TD / 405 XUD7TE.Catalogue; Wikipedia says each XUD9 version used either a Bosch or Lucas mechanical pump
XUD9 / XUD9TE (1.9)306, 405, 406, 806, Xsara, ZX, Xantia, Berlingo, Partner, ExpertBosch VE (D8B example pump XUD 212 R 513) or Lucas DPC. The XUD9BTF carries a semi-electronic Bosch VP20 (XUD BP 02 601) with advance solenoid and needle-lift sensor. Catalogued Bosch VE numbers: 0 460 494 388 (405 1.9 D / TD / Turbo D), 0 460 494 427 (VE4/9F2250R601-2; 406 1.9 TD 90 PS and 806), 0 460 494 446 (VE4/9F2250R601-3; Xantia), 0 460 494 423 (VE4/9F2250R513-4; 806 and Expert).Service document; catalogue. No 306-specific VE number was found.
XUD11ATE (2.1 turbo)XM, 605Mechanical pump; Lucas DPC 8443B744B catalogued for XM 2.1 Turbo D XUD11ATE. Wikipedia lists a Bosch pump with throttle cable.Conflicting: confirm by plate
XUD11BTE (2.1 turbo)XM, 406, 605, XantiaLucas EPIC electronic rotary pump, ECU reference R04010011B on a 1996 XMService document
DK5 (2.5 turbo)XMBosch VP36 with MSA11 7.6 ECU, Bosch controller 0281001336Service document
TUD5 1.5DSaxo, 106Lucas DPC R8444 B/662C on one VJZ example; Snap-on lists Lucas or Bosch VP20 for VJY/VJZService document; both makers listed
DW8 / DW8B (1.9 N/A, WJY and WJZ)206, 306, Partner, Berlingo, Xsara, Jumpy, ExpertLucas/Delphi mechanical pump with electronic advance control (DCN2) and a needle-lift sensor on one injector. Owners also report a Bosch VE pump, 0 460 494 462 (VE4/9F2425R804), on a Berlingo, and a catalogue lists that number for the Partner 1.9 D. A Lucas pump marked R8448B182C / DPCDWLP12 is reported on a 206 WJZ, and R8445B350B on another car. Some Partner pumps carry a Lucas-stamped throttle sensor on a body plate reading Delphi.Service document for the Lucas system; Bosch and plate details anecdotal or catalogue

High-pressure pipes differ by pump make. An owner comparison lists the Lucas-pump DW8 pipe harness as 1570 81 (12 x 150, Expert) and the Bosch-pump Berlingo harness as 1570 87. Treat these as leads and check the pipe set against the pump actually fitted, since a different pipe set is also documented on the XUD9BTF with a needle-lift injector.

For timing figures, EPIC live-data parameters and boost-compensator (LDA) behaviour on these pumps, see the Peugeot and Citroën rotary pump diesel tuning guide.

Common-rail HDi: pump and injector families

Engine / codesTypical vehiclesHigh-pressure pump listedInjectors listedEvidence
DW10TD 2.0 HDi 8v (RHY, RHZ, RHX, RHS)206, 306, 307, 406, Xsara, Xantia, C5, Berlingo, Partner, Expert, Jumpy, 806Bosch CP1 0445010010 (alternatives 0445010162, 0445010282; OE references 1920 6X, 1920 CY, 96 320 137)Bosch 0445110 series, for example 0445110008, 0445110044, 0445110057, 0445110076Catalogue
DW10 2.0 HDi 100 kW (RHR, RHK)C4, C5, C8, 307, 407, 607, 807; some Ford, Volvo and MazdaSiemens VDO 5WS40019 (also 1920QH, 1920N8, 9658193980, 9688153080)Siemens VDO / Continental, for example 5WS40156Z and A2C59511601 (supplier describes as DW10B)Catalogue
DW10 2.0 HDi earlier Siemens SID801 carsPartner, 307Siemens VDO 5WS40018 (also 9636818480) is sold for 307, 406, Partner, Berlingo, C5 and XsaraSiemensCatalogue: the supplier lists no engine code, so which RHY/RHZ cars used it is unconfirmed. An owner swap of a Siemens SID801 ECU, injectors and pump to a Bosch EDC15C2 set-up on a 2002 Partner RHY is documented online.
DW10C 2.0 HDi second generationC5, 407, 508 and laterNot confirmed here. Searches for a DW10BTED4/DW10C pump number returned only generic Bosch CP1H3 variants, not a PSA fitment.Delphi (28… and EMBR… series)Catalogue (injecteurs-diesel.com)
DW10F 2.0 BlueHDi308, 508, Jumpy, ExpertBosch single-piston synchronous pump, up to 2,000 bar, driven by the exhaust camshaftNot confirmed hereNTN-SNR document; ECU Delphi DCM7.1A on selected cars
DV4TD 1.4 HDi 8v (8HX, 8HZ)206, 207, 307, C2, C3Siemens VDO 5WS40008Z (OE 1920 EP) is catalogued for 8HX/8HZ on C2, C3 and 206/207/307. Bosch CP1H3 and CP4S1 pumps are also listed against some 8HX applications.Bosch listings 0445110075, 0445110135, 0445110252, 0445110339 appear on a supplier page, but it does not state which DV4 variants they fitCatalogue; makers conflict, so confirm by plate
DV4TED4 1.4 HDi 16v (8HY)C3, 1007Delphi 9643567280 / 9652615680 (also 1920ET, 1921N2, R9042Z021A)Not confirmed hereCatalogue. Wikipedia also notes Siemens SID804/802 on most DV4 and SID805 on the lower-power C1/107 version, with Delphi DCR1400 on one variant.
DV6 1.6 HDi first generation (9HX, 9HY, 9HZ)206, 207, 307, 308, 407, 3008, Partner, Berlingo, C3, C4, Xsara Picasso; also Ford 1.6 TDCi and VolvoBosch CP1H 0445010296 (9HY/9HZ), alternative 0445010102. A PSA document describes a Bosch CP1-type 3-piston pump, belt driven at ratio 0.5.Bosch, 90 hp: 0445110239 or 0445110311; 110 hp: 0445110259 or 0445110297. The 90 and 110 injectors share a body but the 110 nozzles flow more.Service document; catalogue; tuner guide
DV6C 1.6 HDi (9HC, 9HD, 9HL, 9HR)Berlingo B9, DS5, 2008 and other later 1.6 HDi 110/112/115VDO high-pressure pump, OEM code 1920RY (DiPa product HPP045N), listed for 9HR and 9HDSiemens VDO / Continental, for example 9802448680 and 9674973080 (A2C59513556). The 9674973080 number is an injector, not a pump.Catalogue
DV6DTED 1.6 HDi 92 hp (9HP)C4 II, Berlingo B9, PartnerBosch CP4 0445010516 is catalogued for a C3 II 1.6 HDi 68 kW; no 9HP-specific pump reference was found, and a further search turned up nothing that confirms itNot confirmed hereCatalogue, indirect
DW12 2.2 HDi (4HT, 4HS, 4HX, 4HW and Ford/Land Rover versions)406 coupé, 407, 607, 807, 4007, C5, C6; Jumper/BoxerBosch 0445010139 (OE 9660352980, 9683268980, 1920PH) is listed for 407 and 807 2.2 HDi at 115 or 125 kW. A Bosch CP1H3 R85/10-789S is listed for the 607 4HT/4HS and 407 4HT. A Bosch CP1H 0445010298 appears in an aftermarket catalogue for a 110 hp 2.2, but the table is unclear. 0445010102 / 9656300380 is also sold for 2.2 applications but its data sheet names 206/C3, so treat it with caution.Bosch 0445110036 listed for 2.2 HDi. Bosch 0445115025 is listed for 2.2 HDi 170 hp cars including the 407, 607 and C6. The same source as the first number contradicts itself and says newer 2.2 engines use Delphi.Catalogue with conflicts
DT17 2.7 V6 HDi407, 607, C5, C6; Jaguar/Land Rover versionsSiemens VDO A2C20003757 / 4S7Q-9B395 is listed for 607, 407, 407 coupé and C6. Do not use Ford/Land Rover TDV6 pump listings as a cross-reference.Siemens VDO / Continental; ECU SID201Catalogue. One listing calls the pump "mechanical", which is likely a catalogue error.
DT20 3.0 V6 HDi407, 607 and C6 lateNot confirmed here. Catalogue results for "3.0 HDi" also bring in Jumper/Boxer van parts such as a Bosch CP4 0445010559; those belong to a different 3.0 engine, so do not apply them to the V6.Bosch listed; ECU EDC17CP11Catalogue

Rules of thumb that do hold up

  • Injector brands do not swap. A parts catalogue states that Bosch and Continental/Delphi injectors are not interchangeable even at the same power output. Read the code stamped on the injector body.
  • Same body, different nozzle. On the 16v 1.6 HDi, the 90 hp and 110 hp injectors share a body but the 110 hp nozzles flow more. Injector part-number suffixes change calibration.
  • Pump families follow ECU families. Bosch EDC15 / EDC16 cars generally pair with Bosch CP1/CP1H pumps; Siemens SID cars pair with Siemens VDO pumps. Do not assume the ECU can be swapped independently of the pump and injectors.
  • One engine code can have more than one pump. Catalogues list Bosch and Siemens VDO pumps against the same 1.4 HDi code, several Bosch references against the 2.2, and both Lucas and Bosch pumps against the DW8. Match the number on the original pump, not just the engine code.
  • Common-rail pumps are not timed. A PSA document states that its CP1-type high-pressure pump is not a distributing pump and does not need setting. This differs from a Bosch VE or Lucas DPC rotary pump.

Related pages

Sources

Rows marked "not confirmed here" were not established by the sources found; they are gaps, not statements that no pump exists. Corrections with a plate photo or catalogue reference are welcome.