Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Abarth, Fiat
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
This white 2013 Fiat 500 Abarth was bought through Cars & Bids and first used as a daily car with track plans. After gasket and component failures the project changed direction and, over five years, became a show car with air suspension, chrome 17 × 8-inch SevenK Hydra wheels and a blue suede interior.
Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
Suspension and wheels
Air springs fitted to Megan Racing coilovers.Air Lift 3P management and an AccuAir tank.Chrome 17 × 8-inch SevenK Hydra wheels.
Interior
Craftmasters trimmed the dashboard, door cards and seats in blue suede.
Engine
ATM front-mounted intercooler and a Forge wastegate actuator.
Sources
MartiniWorks build log: parts list and gallery (30 January 2026)
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: BaggedAbarth’s 2013 Fiat 500 Abarth on air suspension
This white 2013 Fiat 500 Abarth was bought through Cars & Bids and first used as a daily car with track plans. After gasket and component failures the project changed direction and, over five years, became a show car with air suspension, chrome 17 × 8-inch SevenK Hydra wheels and a blue suede interior.

Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
Suspension and wheels
- Air springs fitted to Megan Racing coilovers.
- Air Lift 3P management and an AccuAir tank.
- Chrome 17 × 8-inch SevenK Hydra wheels.
Interior
Craftmasters trimmed the dashboard, door cards and seats in blue suede.
Engine
ATM front-mounted intercooler and a Forge wastegate actuator.
Sources
Revision 2: BaggedAbarth’s 2013 Fiat 500 Abarth on air suspension
This white 2013 Fiat 500 Abarth was bought through Cars & Bids and first used as a daily car with track plans. After gasket and component failures the project changed direction and, over five years, became a show car with air suspension, chrome 17 × 8-inch SevenK Hydra wheels and a blue suede interior.

Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
Suspension and wheels
- Air springs fitted to Megan Racing coilovers.
- Air Lift 3P management and an AccuAir tank.
- Chrome 17 × 8-inch SevenK Hydra wheels.
Interior
Craftmasters trimmed the dashboard, door cards and seats in blue suede.
Engine
ATM front-mounted intercooler and a Forge wastegate actuator.
Sources