Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Abarth, Fiat

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

This is a red 2013 Fiat 500 Abarth bought in Green Bay in early 2024 and driven until midsummer before the build began. The owner's November 2025 parts list includes a 500 Speed Lab widebody kit, Squeaky Clean Air suspension and 17 × 8.5-inch ESM 004 wheels (ET30) with 205/40 R17 tyres.

Photo from Dmdsierra12’s MartiniWorks gallery, reproduced with permission.

Exterior and exhaust

A Sforza rear diffuser frames the custom centre-exit exhaust.

Interior

Houndstooth Braum seats are paired with hand-sewn floor mats, and an Abarth scorpion is worked into the illuminated headlining.

Sources

MartiniWorks build thread: build log, parts list and gallery (18 November 2025)MartiniWorks build thread: earlier “Calcifer” show build post (9 October 2024)

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Dmdsierra12’s widebody 2013 Fiat 500 Abarth

This is a red 2013 Fiat 500 Abarth bought in Green Bay in early 2024 and driven until midsummer before the build began. The owner's November 2025 parts list includes a 500 Speed Lab widebody kit, Squeaky Clean Air suspension and 17 × 8.5-inch ESM 004 wheels (ET30) with 205/40 R17 tyres.

Dmdsierra12’s Abarth from the owner’s build gallery

Photo from Dmdsierra12’s MartiniWorks gallery, reproduced with permission.

Exterior and exhaust

A Sforza rear diffuser frames the custom centre-exit exhaust.

Interior

Houndstooth Braum seats are paired with hand-sewn floor mats, and an Abarth scorpion is worked into the illuminated headlining.

Sources

Revision 2: Dmdsierra12’s widebody 2013 Fiat 500 Abarth

This is a red 2013 Fiat 500 Abarth bought in Green Bay in early 2024 and driven until midsummer before the build began. The owner's November 2025 parts list includes a 500 Speed Lab widebody kit, Squeaky Clean Air suspension and 17 × 8.5-inch ESM 004 wheels (ET30) with 205/40 R17 tyres.

Dmdsierra12’s Abarth from the owner’s build gallery

Photo from Dmdsierra12’s MartiniWorks gallery, reproduced with permission.

Exterior and exhaust

A Sforza rear diffuser frames the custom centre-exit exhaust.

Interior

Houndstooth Braum seats are paired with hand-sewn floor mats, and an Abarth scorpion is worked into the illuminated headlining.

Sources