Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
This is a Swedish rear-wheel-drive 1990 Ford Sierra Cosworth with a rebuilt turbo engine and an E36 BMW M3 six-speed gearbox. The owner, Micke (Majkey on PassionFord), bought it in 2009. He reports 500 bhp and 505 Nm with a GTX3076 turbo and TG exhaust manifold, after an earlier 472 bhp with a Precision SC5862 (owner-reported figures).
Engine
Blue exhaust smoke prompted an engine rebuild by the owner and his friend Putte. The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controls the engine with 990 cc injectors.
Power figures
The owner reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. These are owner-reported. The separate dyno graph was identified by the owner as wheel horsepower, and he corrected the turbo designation printed on it.
Transmission
An E36 M3 six-speed gearbox was adapted to the Sierra, which also gained a Quaife differential and a hydraulic clutch.
Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery
Sources
PassionFord build thread: illustrated build history and power figuresPassionFord build thread: gearbox and clutch installation notesPassionFord build thread: dyno-sheet correctionGaraget entry: specification and photo gallerySwedish build diary on Skogen Racing forum
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Majkey’s six-speed 1990 Ford Sierra Cosworth
This is a Swedish rear-wheel-drive 1990 Ford Sierra Cosworth with a rebuilt turbo engine and an E36 BMW M3 six-speed gearbox. The owner, Micke (Majkey on PassionFord), bought it in 2009. He reports 500 bhp and 505 Nm with a GTX3076 turbo and TG exhaust manifold, after an earlier 472 bhp with a Precision SC5862 (owner-reported figures).

Engine
Blue exhaust smoke prompted an engine rebuild by the owner and his friend Putte. The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controls the engine with 990 cc injectors.

Power figures
The owner reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. These are owner-reported. The separate dyno graph was identified by the owner as wheel horsepower, and he corrected the turbo designation printed on it.
Transmission
An E36 M3 six-speed gearbox was adapted to the Sierra, which also gained a Quaife differential and a hydraulic clutch.
Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery
Sources
Revision 2: Majkey’s six-speed 1990 Ford Sierra Cosworth
This is a Swedish rear-wheel-drive 1990 Ford Sierra Cosworth with a rebuilt turbo engine and an E36 BMW M3 six-speed gearbox. The owner, Micke (Majkey on PassionFord), bought it in 2009. He reports 500 bhp and 505 Nm with a GTX3076 turbo and TG exhaust manifold, after an earlier 472 bhp with a Precision SC5862 (owner-reported figures).

Engine
Blue exhaust smoke prompted an engine rebuild by the owner and his friend Putte. The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controls the engine with 990 cc injectors.

Power figures
The owner reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. These are owner-reported. The separate dyno graph was identified by the owner as wheel horsepower, and he corrected the turbo designation printed on it.
Transmission
An E36 M3 six-speed gearbox was adapted to the Sierra, which also gained a Quaife differential and a hydraulic clutch.
Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery
Sources