Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

Botacco's Ford Tourneo Custom is fitted with a removable camper interior: plywood cabinetry, a sliding bench-bed, a small kitchen and a 210 W roof solar installation. It replaced a Tourneo Connect to give more room. The design aim was for the furniture to be removable in half an hour and installable without drilling the body.

Plywood side cabinet fitted alongside the seating in Botacco’s Tourneo Custom

Cabinetry, sleeping and kitchen layout

The side cabinet is made from 15 mm plywood and secured at floor level with a seat-rail fixing, leaving a 50 cm passage at the right-hand exit. A second bench slides under the main bench when the bed is stowed, freeing space for storage. The finished layout has cabinet doors hung and a sink, tap and pump fitted.

Roof-mounted solar

The roof carries a 210 W CV210 photovoltaic panel with a Victron BlueSolar controller with a Bluetooth interface.

Overhead view of the 210 W panel fitted to the Tourneo roof

Photographs by botacco on IDAF, reproduced with permission.

Sources