Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Maserati

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

Owner’s photo supplied for this article, reproduced with permission.

"Meatball" is a 1985 Maserati Biturbo in which the original V6 has been replaced by a twin-turbo 5.3-litre aluminium LS V8 with a T56 six-speed manual gearbox. The car also has custom front suspension, an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage.

Engine and turbo fabrication

The 5.3-litre aluminium LS V8 and twin-turbo system are coupled to the T56 gearbox. In a later revision the 62 mm turbos were mounted to the chassis and exhaust flex sections were added to reduce the load on the pipework. The custom pipework uses numerous pie-cut welded sections.

Chassis and cooling

The front suspension is custom, based on Nissan 240SX parts, with an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage. The headlamp openings are used as forced-induction air inlets. This is the car’s configuration as listed in the owner’s 2022 update.

Sources

Reddit r/projectcar: initial 5.3-litre twin-turbo LS swapReddit r/projectcar: intercooler pipework and suspension updateReddit r/projectcar: eight-point roll cage updateReddit r/projectcar: revised twin-turbo mounting and fabricationReddit r/projectcar: 2022 car photo and specification

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Meatball — twin-turbo LS-swapped Maserati Biturbo

Meatball, the red 1985 Maserati Biturbo with exposed intercooler and roll cage, at a filling station

Owner’s photo supplied for this article, reproduced with permission.

"Meatball" is a 1985 Maserati Biturbo in which the original V6 has been replaced by a twin-turbo 5.3-litre aluminium LS V8 with a T56 six-speed manual gearbox. The car also has custom front suspension, an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage.

Engine and turbo fabrication

The 5.3-litre aluminium LS V8 and twin-turbo system are coupled to the T56 gearbox. In a later revision the 62 mm turbos were mounted to the chassis and exhaust flex sections were added to reduce the load on the pipework. The custom pipework uses numerous pie-cut welded sections.

Chassis and cooling

The front suspension is custom, based on Nissan 240SX parts, with an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage. The headlamp openings are used as forced-induction air inlets. This is the car’s configuration as listed in the owner’s 2022 update.

Sources

Revision 2: Meatball — twin-turbo LS-swapped Maserati Biturbo

Meatball, the red 1985 Maserati Biturbo with exposed intercooler and roll cage, at a filling station

Owner’s photo supplied for this article, reproduced with permission.

"Meatball" is a 1985 Maserati Biturbo in which the original V6 has been replaced by a twin-turbo 5.3-litre aluminium LS V8 with a T56 six-speed manual gearbox. The car also has custom front suspension, an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage.

Engine and turbo fabrication

The 5.3-litre aluminium LS V8 and twin-turbo system are coupled to the T56 gearbox. In a later revision the 62 mm turbos were mounted to the chassis and exhaust flex sections were added to reduce the load on the pipework. The custom pipework uses numerous pie-cut welded sections.

Chassis and cooling

The front suspension is custom, based on Nissan 240SX parts, with an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage. The headlamp openings are used as forced-induction air inlets. This is the car’s configuration as listed in the owner’s 2022 update.

Sources