Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Opel

This green Opel Speedster was collected in the Netherlands as a standard car by its owner, MCfab, and rebuilt around owner-fabricated titanium suspension components. The work covers suspension, steering, exhaust, brakes and carbon aero parts.

MCfab’s dark green Speedster on the collection trip

Suspension and steering

The suspension was stripped first and fitted with three-way Nitron dampers and FRAP Racing ball joints. The steering rack was rebuilt and the steering ends replaced.

The owner made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster, and also reinforced the rear suspension arms. Photographs show the bushes separately and pressed into the arms.

Green suspension bush with its centre insert fitted to a black arm

Exposed suspension and brake assembly during MCfab’s workshop rebuild

Exhaust, brakes and bodywork

A titanium exhaust was fabricated by the owner, including work on a 4-2-1 manifold. Later changes record 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing.

Photographs by MCfab, reproduced with permission. Original build gallery

Sources