Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.
Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaust
The car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.
Induction
The second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.
The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspension
The car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.
Sources
Ford Owners Club build thread: opening postFord Owners Club build thread: Mountune m330 calibrationFord Owners Club build thread: m365 downpipe setupFord Owners Club build thread: wheels and tyresFord Owners Club build thread: Eibach spring updateFord Owners Club build thread: Airtec induction updateFord Owners Club build thread: Dreamscience Ultima RS calibration
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Col’s Ford Focus ST Mk4 – Mountune m365 to Dreamscience Ultima RS
Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.

Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaust
- The car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.
- The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.
Induction
The second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.

The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspension
The car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.
Sources
Revision 2: Col’s Ford Focus ST Mk4 – Mountune m365 to Dreamscience Ultima RS
Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.

Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaust
- The car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.
- The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.
Induction
The second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.

The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspension
The car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.
Sources