Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.

Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaust
- The car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.
- The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.
Induction
The second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.

The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspension
The car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.
Sources
- Ford Owners Club build thread: opening post
- Ford Owners Club build thread: Mountune m330 calibration
- Ford Owners Club build thread: m365 downpipe setup
- Ford Owners Club build thread: wheels and tyres
- Ford Owners Club build thread: Eibach spring update
- Ford Owners Club build thread: Airtec induction update
- Ford Owners Club build thread: Dreamscience Ultima RS calibration