Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Renault Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Renault

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

The engines

The Mk1 Clio 16v (1.8, F7P) and Clio Williams (2.0, F7R) are the older cousins of the F4R used in the Clio II RS 172 and 182. Model background is on Renault Clio: generations and engines. The Williams is usually quoted at about 150 bhp, and discussion of the cars gives a lower redline than the Megane-engined equivalent (about 6,500 rpm against 6,800), which I could not confirm from a documented source.

Camshafts first

For these engines the consistent advice in enthusiast discussion is to start with cams. Cat Cams lists sports profiles for the F7P and F7R, and Piper's range via Weber Carburettors offers Fast Road, Ultimate Road, Rally and Race grinds, as new cams or as a regrind of the originals at about half the price, plus a vernier pulley, valve springs and followers. The Piper page publishes no lift or duration figures, so they must be obtained from the supplier. Cam timing and ignition change together, so a camshaft change belongs with a revised calibration.

Induction layout

The standard car has no intake pipe between the airbox and the engine: the airbox bolts directly onto the throttle body, which is an egg-shaped unit with two throttle plates. That limits intake pipe options and is why the usual route is a panel filter or a modest induction kit and a short hose. Owner discussion is split on whether the larger Megane throttle body is worth the swap.

Power evidence

Everything on power is old and unverified. Figures from a 2002 thread include about 165 bhp on rollers with a chip, induction kit and exhaust, and estimates of 180 to 185 bhp with cams and a worked head. One builder expected about 180 bhp from a Hillpower 2.0 conversion with modified head, Piper cams, verniers, chip and full exhaust. Treat them as estimates. A claim that the Megane F7R ECU cannot be remapped or chipped is unverified and may simply reflect the tools of the time.

Sources

Weber Carburettors: Piper cams for Clio 16v F7P and Williams F7R, accessed 2026-11-19. STR Performance: Cat Cams for Clio 16S and Williams F7P/F7R, via search summary 2026-11-19. ClioSport: Clio Williams engine tuning questions, 2002, accessed 2026-11-19.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Renault Clio Williams and 16v (F7P and F7R) cams and induction

The engines

The Mk1 Clio 16v (1.8, F7P) and Clio Williams (2.0, F7R) are the older cousins of the F4R used in the Clio II RS 172 and 182. Model background is on Renault Clio: generations and engines. The Williams is usually quoted at about 150 bhp, and discussion of the cars gives a lower redline than the Megane-engined equivalent (about 6,500 rpm against 6,800), which I could not confirm from a documented source.

Camshafts first

For these engines the consistent advice in enthusiast discussion is to start with cams. Cat Cams lists sports profiles for the F7P and F7R, and Piper's range via Weber Carburettors offers Fast Road, Ultimate Road, Rally and Race grinds, as new cams or as a regrind of the originals at about half the price, plus a vernier pulley, valve springs and followers. The Piper page publishes no lift or duration figures, so they must be obtained from the supplier. Cam timing and ignition change together, so a camshaft change belongs with a revised calibration.

Induction layout

The standard car has no intake pipe between the airbox and the engine: the airbox bolts directly onto the throttle body, which is an egg-shaped unit with two throttle plates. That limits intake pipe options and is why the usual route is a panel filter or a modest induction kit and a short hose. Owner discussion is split on whether the larger Megane throttle body is worth the swap.

Power evidence

Everything on power is old and unverified. Figures from a 2002 thread include about 165 bhp on rollers with a chip, induction kit and exhaust, and estimates of 180 to 185 bhp with cams and a worked head. One builder expected about 180 bhp from a Hillpower 2.0 conversion with modified head, Piper cams, verniers, chip and full exhaust. Treat them as estimates. A claim that the Megane F7R ECU cannot be remapped or chipped is unverified and may simply reflect the tools of the time.

Sources

Revision 1: Renault Clio Williams and 16v (F7P and F7R) cams and induction

The engines

The Mk1 Clio 16v (1.8, F7P) and Clio Williams (2.0, F7R) are the older cousins of the F4R used in the Clio II RS 172 and 182. Model background is on Renault Clio: generations and engines. The Williams is usually quoted at about 150 bhp, and discussion of the cars gives a lower redline than the Megane-engined equivalent (about 6,500 rpm against 6,800), which I could not confirm from a documented source.

Camshafts first

For these engines the consistent advice in enthusiast discussion is to start with cams. Cat Cams lists sports profiles for the F7P and F7R, and Piper's range via Weber Carburettors offers Fast Road, Ultimate Road, Rally and Race grinds, as new cams or as a regrind of the originals at about half the price, plus a vernier pulley, valve springs and followers. The Piper page publishes no lift or duration figures, so they must be obtained from the supplier. Cam timing and ignition change together, so a camshaft change belongs with a revised calibration.

Induction layout

The standard car has no intake pipe between the airbox and the engine: the airbox bolts directly onto the throttle body, which is an egg-shaped unit with two throttle plates. That limits intake pipe options and is why the usual route is a panel filter or a modest induction kit and a short hose. Owner discussion is split on whether the larger Megane throttle body is worth the swap.

Power evidence

Everything on power is old and unverified. Figures from a 2002 thread include about 165 bhp on rollers with a chip, induction kit and exhaust, and estimates of 180 to 185 bhp with cams and a worked head. One builder expected about 180 bhp from a Hillpower 2.0 conversion with modified head, Piper cams, verniers, chip and full exhaust. Treat them as estimates. A claim that the Megane F7R ECU cannot be remapped or chipped is unverified and may simply reflect the tools of the time.

Sources