This page summarises how Biturbo boost is controlled and what owners report doing to change it. Most tuning information found is enthusiast forum material, not factory data; boost increases without fuel and ignition checks can destroy the engine. No dyno-verified results or ECU map values were found, so none are given.
MABC
- From June 1983 Maserati fitted the Maserati Automatic Boost Control (MABC), a solenoid-based system that uses inlet manifold pressure and engine speed (via a pressure transducer) to trim how fast boost rises and its maximum.
- It acts through the wastegate actuators, so wastegate opening depends on boost pressure.
- Saab's Automatic Performance Control was supplied to Maserati for the carburettor Biturbo and retuned as MABC (Wikipedia). A 2.5 litre car is described with a computer-controlled wastegate and 11 psi maximum (Old Cars Weekly).
- Factory part diagrams for the boost control system and wastegate pipework are listed by Eurospares (part numbers only).
Common modifications reported (forum sources)
- Wastegate line bleed: bleeding air from the wastegate actuator lines limits actuator travel and raises boost; described as the most common fudge.
- Altering the MABC sensing: one owner shorted the pressure transducer for about 15 psi, roughly 50% above standard; another used a fudged transducer so the system holds boost higher.
- Electronic boost controller: suggested with a wideband lambda sensor to watch mixture.
- Supporting parts: better intercooling, a blow-off valve (to protect the turbos from surge), upgraded wastegate actuators and boost solenoids, and a revised fuel map.
- Standalone ECU: one thread suggests Vipec or Haltech for injection cars. Carburettor cars have no engine ECU to replace. This is opinion, not tested guidance.
- Old Cars Weekly reports about 25 bhp gained by removing the catalytic converter on a US car, where that is legal.
Source threads: MaseratiLife performance upgrades; the Maserati Alfieri "Tuning a Biturbo" page was cited in search results but could not be opened here.
Cautions
- Turbochargers are the main failure concern; oil supply and oil quality matter, see common faults and repair.
- More boost on a carburettor car changes mixture and detonation margin together; no safe values have been sourced.
- Different markets and catalyst versions have different outputs, so a baseline power run is needed first.
Related: fuelling and ECU, engines.