This page lists which injection pump and injector family is documented for common Peugeot and Citroën (PSA) diesel engines. Most entries come from parts-catalogue fitment lists and service documents rather than a single factory application table, so each row is graded. Always confirm against the plate on your own pump, the stamped number on the injector bodies and the engine code before ordering parts or changing a calibration.
How to read the evidence column
- Service document: a workshop or training document describes the system for that engine.
- Catalogue: a parts supplier lists the part against that engine code. It shows what the supplier sells for it, not that every car left the factory with that part.
- Anecdotal: owner or forum report; use only as a lead.
Indirect-injection mechanical and electronic rotary pumps
| Engine | Typical vehicles | Pump listed | Evidence |
|---|---|---|---|
| XUD7 / XUD7TE (1.8) | 205, 309, 405 turbo, BX | Bosch VE; 0 460 484 038 (VE4/8F2150R403) is catalogued for BX 17 turbo and 405 1.8 turbo. Lucas DPC 8443B453D is catalogued for BX 1.7 TD / 405 XUD7TE. | Catalogue; Wikipedia says each XUD9 version used either a Bosch or Lucas mechanical pump |
| XUD9 / XUD9TE (1.9) | 306, 405, Xsara, ZX, Xantia, Berlingo, Partner | Bosch VE (D8B example pump XUD 212 R 513) or Lucas DPC. The XUD9BTF carries a semi-electronic Bosch VP20 (XUD BP 02 601) with advance solenoid and needle-lift sensor. | Service document |
| XUD11ATE (2.1 turbo) | XM, 605 | Mechanical pump; Lucas DPC 8443B744B catalogued for XM 2.1 Turbo D XUD11ATE. Wikipedia lists a Bosch pump with throttle cable. | Conflicting: confirm by plate |
| XUD11BTE (2.1 turbo) | XM, 406, 605, Xantia | Lucas EPIC electronic rotary pump, ECU reference R04010011B on a 1996 XM | Service document |
| DK5 (2.5 turbo) | XM | Bosch VP36 with MSA11 7.6 ECU, Bosch controller 0281001336 | Service document |
| TUD5 1.5D | Saxo, 106 | Lucas DPC R8444 B/662C on one VJZ example; Snap-on lists Lucas or Bosch VP20 for VJY/VJZ | Service document; both makers listed |
| DW8 / DW8B (1.9 N/A) | 206, 306, Partner, Berlingo, Xsara, Jumpy | Lucas/Delphi mechanical pump with electronic advance control (DCN2), needle-lift sensor on one injector | Service document |
For timing figures, EPIC live-data parameters and boost-compensator (LDA) behaviour on these pumps, see the Peugeot and Citroën rotary pump diesel tuning guide.
Common-rail HDi: pump and injector families
| Engine / codes | Typical vehicles | High-pressure pump listed | Injectors listed | Evidence |
|---|---|---|---|---|
| DW10TD 2.0 HDi 8v (RHY, RHZ, RHX, RHS) | 206, 306, 307, 406, Xsara, Xantia, C5, Berlingo, Partner, Expert, Jumpy, 806 | Bosch CP1 0445010010 (alternatives 0445010162, 0445010282; OE references 1920 6X, 1920 CY, 96 320 137) | Bosch 0445110 series, for example 0445110008, 0445110044, 0445110057, 0445110076 | Catalogue |
| DW10 2.0 HDi 100 kW (RHR, RHK) | C4, C5, C8, 307, 407, 607, 807; some Ford, Volvo and Mazda | Siemens VDO 5WS40019 (also 1920QH, 1920N8, 9658193980, 9688153080) | Siemens VDO / Continental, for example 5WS40156Z and A2C59511601 (supplier describes as DW10B) | Catalogue |
| DW10 2.0 HDi earlier 8v/16v Siemens SID801 cars | Partner, 307 | Siemens VDO 5WS40018 (also 9636818480) is sold for 307, 406, Partner, Berlingo, C5 and Xsara | Siemens | Catalogue: the supplier lists no engine code, so which RHY/RHZ cars used it is unconfirmed. A forum thread describes swapping a Siemens SID801 ECU, injectors and pump for a Bosch EDC15C2 set-up on a 2002 Partner RHY. |
| DW10C 2.0 HDi second generation | C5, 407, 508 and later | Not confirmed here | Delphi (28… and EMBR… series) | Catalogue (injecteurs-diesel.com) |
| DW10F 2.0 BlueHDi | 308, 508, Jumpy, Expert | Bosch single-piston synchronous pump, up to 2,000 bar, driven by the exhaust camshaft | Not confirmed here | NTN-SNR document; ECU Delphi DCM7.1A on selected cars |
| DV4 1.4 HDi (8HX, 8HY, 8HZ, 8HR etc.) | 206, 207, 307, C2, C3, Berlingo, 1007 | Siemens common rail (SID802/SID804, SID805 on the lower-power 107/C1 version); Delphi DCR1400 on one variant. A supplier lists Delphi 9643567280 / 9652615680 for the 8HY. | Bosch listings 0445110075, 0445110135, 0445110252, 0445110339 appear on a supplier page, but it does not state which DV4 variants they fit | Mixed: supplier listings; Wikipedia-sourced engine summary. DV4 variants differ, so verify. |
| DV6 1.6 HDi first generation (9HX, 9HY, 9HZ) | 206, 207, 307, 308, 407, 3008, Partner, Berlingo, C3, C4, Xsara Picasso; also Ford 1.6 TDCi and Volvo | Bosch CP1H 0445010296 (9HY/9HZ), alternative 0445010102. A PSA document describes a Bosch CP1-type 3-piston pump, belt driven at ratio 0.5. | Bosch, 90 hp: 0445110239 or 0445110311; 110 hp: 0445110259 or 0445110297. The 90 and 110 injectors share a body but the 110 nozzles flow more. | Service document; catalogue; tuner guide |
| DV6C 1.6 HDi (9HC, 9HD, 9HL, 9HR) | Later 1.6 HDi 110/112/115 | Not confirmed here | Siemens VDO / Continental, for example 9802448680, 9674973080 (A2C59513556) | Catalogue |
| DW12 2.2 HDi (4HT, 4HX, 4HW and Ford/Land Rover versions) | 406 coupé, 407, 607, 807, 4007, C5, C6; Jumper/Boxer | Bosch listed by a pump specialist for DW12 engines (Freelander 2, 4007, 508, 607, 807). A Bosch CP1H 0445010298 appears in an aftermarket catalogue for a 110 hp 2.2, but the table is unclear. | Bosch 0445110036 listed for 2.2 HDi. The same source contradicts itself and says newer 2.2 engines use Delphi. | Catalogue with conflicts |
| DT17 2.7 V6 HDi | 407, 607, C5, C6, Jaguar/Land Rover versions | Not confirmed here | Siemens VDO / Continental; ECU SID201 | Catalogue |
| DT20 3.0 V6 HDi | 407, 607 and C6 late | Not confirmed here | Bosch listed; ECU EDC17CP11 | Catalogue |
Rules of thumb that do hold up
- Injector brands do not swap. A parts catalogue states that Bosch and Continental/Delphi injectors are not interchangeable even at the same power output. Read the code stamped on the injector body.
- Same body, different nozzle. On the 16v 1.6 HDi, the 90 hp and 110 hp injectors share a body but the 110 hp nozzles flow more. Injector part-number suffixes change calibration.
- Pump families follow ECU families. Bosch EDC15 / EDC16 cars generally pair with Bosch CP1/CP1H pumps; Siemens SID cars pair with Siemens VDO pumps. Do not assume the ECU can be swapped independently of the pump and injectors.
- Common-rail pumps are not timed. A PSA document states that its CP1-type high-pressure pump is not a distributing pump and does not need setting. This differs from a Bosch VE or Lucas DPC rotary pump.
Related pages
- Peugeot HDi injector and high-pressure pump tuning guide
- PSA HDi and BlueHDi diesel tuning guide (ECU identification)
- Bosch common-rail diesel injector part numbers
- Siemens and Continental injector part numbers
- Diesel injector catalogue
Sources
- Darwen Diesels: Bosch CP1 0445010010 fitment list (RHY, RHZ, RHX, RHS)
- Autotech24: Siemens VDO 5WS40019 (RHR, RHK)
- Darwen Diesels: Bosch CP1H 0445010296 (9HY, 9HZ)
- Fuel system information for PSA HDi engines (PDF)
- Injecteurs-diesel.com: HDi injector families by engine
- HDI Tuning: 1.6 16v injector and turbo guide (PDF)
- Wikipedia: PSA XUD engine
- Wikipedia: PSA EW/DW engine
- MHH Auto forum: Siemens to Bosch swap, 2.0 HDi RHY (anecdotal)
Rows marked "not confirmed here" were not established by the sources found; they are gaps, not statements that no pump exists. Corrections with a plate photo or catalogue reference are welcome.