Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Volvo
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This white Volvo 244 in Greece was developed from a naturally aspirated engine into a modified B21ET turbo build. A power figure of 425 whp is reported by the owner (owner-reported; the build thread also includes dyno video and notes).Aris, posting as aristg, documented his white Volvo 244 on Turbobricks. His opening build post reports 425 whp and describes the car’s evolution from a naturally aspirated engine to a modified B21ET turbo setup.EngineB21ET turbo engine with a ported 531 cylinder head, modified camshaft and adjustable timing gear.Rebuild with a bored block and added oil squirters.An ENEM K13 turbo cam was tried while investigating exhaust temperatures.A May 2016 update added a new exhaust manifold and fuel-system upgrades.DrivetrainM90 gearbox conversion with hydraulic clutch.Eaton Truetrac differential.A 2020 update changed the clutch and flywheel.CoolingMitsubishi Evo VIII intercooler.Results425 whp is the owner’s reported figure; the thread includes dyno video and notes.Build details and updatesAris describes a ported 531 cylinder head, modified camshaft and adjustable timing gear, an M90 gearbox conversion with hydraulic clutch, an Eaton Truetrac differential and a Mitsubishi Evo VIII intercooler. His engine rebuild included a bored block and added oil squirters.In a later update he described trying an ENEM K13 turbo cam while investigating exhaust temperatures. His May 2016 update describes a new exhaust manifold and fuel-system upgrades. He shared dyno video and notes, then detailed a clutch and flywheel change in his 2020 update.Photos from the owner’s opening post, reused with permission. The engine-bay image shows an earlier stage in the build.SourcesTurbobricks build thread: opening post with 425 whp and build detailsTurbobricks build thread: ENEM K13 turbo cam and exhaust temperaturesTurbobricks build thread: May 2016 exhaust manifold and fuel-system updateTurbobricks build thread: dyno video and notesTurbobricks build thread: 2020 clutch and flywheel changeExterior photoEngine-bay photoPhotos from Aris’s opening post, reused with permission. The engine-bay image shows an earlier stage in the build. Exterior photo · Engine-bay photo.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Aris’s 425 whp Volvo 244 turbo build
Aris, posting as aristg, documented his white Volvo 244 on Turbobricks. His opening build post reports 425 whp and describes the car’s evolution from a naturally aspirated engine to a modified B21ET turbo setup.

Build details and updates
Aris describes a ported 531 cylinder head, modified camshaft and adjustable timing gear, an M90 gearbox conversion with hydraulic clutch, an Eaton Truetrac differential and a Mitsubishi Evo VIII intercooler. His engine rebuild included a bored block and added oil squirters.
In a later update he described trying an ENEM K13 turbo cam while investigating exhaust temperatures. His May 2016 update describes a new exhaust manifold and fuel-system upgrades. He shared dyno video and notes, then detailed a clutch and flywheel change in his 2020 update.

Photos from Aris’s opening post, reused with permission. The engine-bay image shows an earlier stage in the build. Exterior photo · Engine-bay photo.
Revision 2: Aris’s 425 whp Volvo 244 turbo build
This white Volvo 244 in Greece was developed from a naturally aspirated engine into a modified B21ET turbo build. A power figure of 425 whp is reported by the owner (owner-reported; the build thread also includes dyno video and notes).

Engine
- B21ET turbo engine with a ported 531 cylinder head, modified camshaft and adjustable timing gear.
- Rebuild with a bored block and added oil squirters.
- An ENEM K13 turbo cam was tried while investigating exhaust temperatures.
- A May 2016 update added a new exhaust manifold and fuel-system upgrades.
Drivetrain
- M90 gearbox conversion with hydraulic clutch.
- Eaton Truetrac differential.
- A 2020 update changed the clutch and flywheel.
Cooling
Mitsubishi Evo VIII intercooler.
Results
425 whp is the owner’s reported figure; the thread includes dyno video and notes.

Photos from the owner’s opening post, reused with permission. The engine-bay image shows an earlier stage in the build.
Sources