Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Maserati

Meatball, the red 1985 Maserati Biturbo with exposed intercooler and roll cage, at a filling station

Owner’s photo supplied for this article, reproduced with permission.

Engine and turbo fabrication

Meatball began as a 1985 Maserati Biturbo. Its builder replaced the original V6 with a 5.3-litre aluminium LS V8 and a twin-turbo system, coupled to a T56 six-speed manual gearbox. In a later revision, the builder mounted the 62 mm turbos to the chassis and added exhaust flex sections to reduce the load on the pipework. The custom pipework uses numerous pie-cut welded sections.

Chassis and cooling

The builder described a custom front suspension based on Nissan 240SX parts, an independent 8.8-inch rear end, a boot-mounted radiator and an eight-point roll cage. The build also uses headlamp openings for forced-induction air inlets. The 2022 update lists these as the car’s configuration at that time.

Owner’s build posts