Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Alfa Romeo
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This is a 2017 Alfa Romeo Giulietta 1.4 MultiAir, originally 150 CV, with a modified TD04L turbo, 390 cc injectors, air suspension and Koshi carbon bodywork. The owner reported 235 CV and 344 Nm on the dyno, and later reported 280 CV and 380 Nm after further engine changes (owner-reported figures).Photos shared by Marco13101978 on ClubAlfa.it and reproduced with permission.
Turbo and fuel system
The initial setup combined a modified TD04L turbo, with a revised compressor and enlarged wastegate port, with 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. The owner specified that the calibration was for 100-octane fuel. The dyno result was an owner-reported 235 CV and 344 Nm.A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner's report.Marco introduced this 2017 150 CV MultiAir with an owner-reported 235 CV and 344 Nm dyno result. Its modified TD04L turbo has a revised compressor and enlarged wastegate port. The setup also includes 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. Marco specified that the calibration was for 100-octane fuel.A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner’s report.Suspension and body
BC Racing coilovers were converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.SourcesClubAlfa.it thread: introduction, dyno figures and photosClubAlfa.it thread: air suspension descriptionClubAlfa.it thread: carbon bodywork updateClubAlfa.it thread: turbo and fuel-system specificationClubAlfa.it thread: later camshaft and power updateThe owner described BC Racing coilovers converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.Owner’s postsIntroduction, dyno figures and photosOwner’s air suspension descriptionCarbon bodywork updateTurbo and fuel-system specificationLater camshaft and power update
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Marco13101978’s 280 CV Alfa Romeo Giulietta MultiAir


Photos shared by Marco13101978 on ClubAlfa.it and reproduced with permission.
Turbo and fuel system
Marco introduced this 2017 150 CV MultiAir with an owner-reported 235 CV and 344 Nm dyno result. Its modified TD04L turbo has a revised compressor and enlarged wastegate port. The setup also includes 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. Marco specified that the calibration was for 100-octane fuel.
A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner’s report.
Suspension and body
The owner described BC Racing coilovers converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.
Owner’s posts
Revision 2: Marco13101978’s 280 CV Alfa Romeo Giulietta MultiAir
This is a 2017 Alfa Romeo Giulietta 1.4 MultiAir, originally 150 CV, with a modified TD04L turbo, 390 cc injectors, air suspension and Koshi carbon bodywork. The owner reported 235 CV and 344 Nm on the dyno, and later reported 280 CV and 380 Nm after further engine changes (owner-reported figures).


Photos shared by Marco13101978 on ClubAlfa.it and reproduced with permission.
Turbo and fuel system
The initial setup combined a modified TD04L turbo, with a revised compressor and enlarged wastegate port, with 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. The owner specified that the calibration was for 100-octane fuel. The dyno result was an owner-reported 235 CV and 344 Nm.
A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner's report.
Suspension and body
BC Racing coilovers were converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.
Sources