Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Alfa Romeo

Front three-quarter view of Marco’s black Giulietta

Carbon grille detail on Marco’s Giulietta

Photos shared by Marco13101978 on ClubAlfa.it and reproduced with permission.

Turbo and fuel system

Marco introduced this 2017 150 CV MultiAir with an owner-reported 235 CV and 344 Nm dyno result. Its modified TD04L turbo has a revised compressor and enlarged wastegate port. The setup also includes 390 cc injectors, a cone intake, a larger Airtec intercooler and a 63.5 mm exhaust. Marco specified that the calibration was for 100-octane fuel.

A later update lists HRE manifolds, an MTD Stage 1+ exhaust camshaft and Velocity carbon intake, with a reported 280 CV and 380 Nm. Those figures are the owner’s report.

Suspension and body

The owner described BC Racing coilovers converted to air suspension with cabin controls. A later cosmetic update added Koshi carbon components including a front splitter, grille, mirrors, side skirts and spoiler.

Owner’s posts