Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Land Rover

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

The "Range Racer" is a 4.2-litre supercharged Range Rover L322 converted for track use by Charlie, Ryan and Simone. The starting car is described by the owner as having 400 hp (the original supercharged engine specification) and weighing 2,640 kg. Changes so far are wider BMW X5 wheels, lowered air suspension and a first interior strip-out that the owner estimates removed more than 150 kg. A baseline outing was made at Bedford Autodrome before the modifications.Charlie, Ryan and Simone chose a 4.2-litre supercharged Range Rover L322 as the basis for their track project. Charlie described the starting car as having 400 hp and weighing 2,640 kg. The team took it to Bedford Autodrome before making changes to establish a baseline. Charlie’s introduction · Bedford benchmark and wheel update

Wheels and suspension

BMW X5 wheels were sourced, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. The owner calculates that the smaller rolling diameter lowers the vehicle by 17 mm and shortens the gearing (owner calculation). Adjustable height-sensor links were used to lower the air suspension.The team sourced BMW X5 wheels, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. Charlie calculated that the smaller rolling diameter lowered the vehicle by 17 mm and shortened the gearing. They also used adjustable height-sensor links to lower the air suspension. Wheel and tyre update · Air-suspension lowering update

Reducing weight

The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. The owner estimates more than 150 kg was removed at that stage (estimate).The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. Charlie estimated more than 150 kg removed at that stage. First interior strip-out

Photographs from the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographsSourcesPistonHeads build thread: project introductionPistonHeads build thread: Bedford benchmark and wheel and tyre updatePistonHeads build thread: air-suspension lowering updatePistonHeads build thread: first interior strip-outThe 400 hp figure describes the original supercharged engine specification. Photographs posted by Charlie in the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Charlie’s supercharged Range Rover “Range Racer”

Charlie, Ryan and Simone chose a 4.2-litre supercharged Range Rover L322 as the basis for their track project. Charlie described the starting car as having 400 hp and weighing 2,640 kg. The team took it to Bedford Autodrome before making changes to establish a baseline. Charlie’s introduction · Bedford benchmark and wheel update

The Range Racer at Bedford Autodrome before track modifications

Wheels and suspension

The team sourced BMW X5 wheels, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. Charlie calculated that the smaller rolling diameter lowered the vehicle by 17 mm and shortened the gearing. They also used adjustable height-sensor links to lower the air suspension. Wheel and tyre update · Air-suspension lowering update

The wide replacement tyres and wheels selected for the Range Racer

Reducing weight

The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. Charlie estimated more than 150 kg removed at that stage. First interior strip-out

Range Racer in the workshop during the weight-reduction work

The 400 hp figure describes the original supercharged engine specification. Photographs posted by Charlie in the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs

Revision 2: Charlie’s supercharged Range Rover “Range Racer”

The "Range Racer" is a 4.2-litre supercharged Range Rover L322 converted for track use by Charlie, Ryan and Simone. The starting car is described by the owner as having 400 hp (the original supercharged engine specification) and weighing 2,640 kg. Changes so far are wider BMW X5 wheels, lowered air suspension and a first interior strip-out that the owner estimates removed more than 150 kg. A baseline outing was made at Bedford Autodrome before the modifications.

The Range Racer at Bedford Autodrome before track modifications

Wheels and suspension

BMW X5 wheels were sourced, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. The owner calculates that the smaller rolling diameter lowers the vehicle by 17 mm and shortens the gearing (owner calculation). Adjustable height-sensor links were used to lower the air suspension.

The wide replacement tyres and wheels selected for the Range Racer

Reducing weight

The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. The owner estimates more than 150 kg was removed at that stage (estimate).

Range Racer in the workshop during the weight-reduction work

Photographs from the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs

Sources