Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Land Rover

Charlie, Ryan and Simone chose a 4.2-litre supercharged Range Rover L322 as the basis for their track project. Charlie described the starting car as having 400 hp and weighing 2,640 kg. The team took it to Bedford Autodrome before making changes to establish a baseline. Charlie’s introduction · Bedford benchmark and wheel update

The Range Racer at Bedford Autodrome before track modifications

Wheels and suspension

The team sourced BMW X5 wheels, 10J front and 11J rear, with 275/40 R20 and 315/35 R20 tyres. Charlie calculated that the smaller rolling diameter lowered the vehicle by 17 mm and shortened the gearing. They also used adjustable height-sensor links to lower the air suspension. Wheel and tyre update · Air-suspension lowering update

The wide replacement tyres and wheels selected for the Range Racer

Reducing weight

The first strip-out removed the rear seats, spare wheel, infotainment units, door cards and sound insulation. Charlie estimated more than 150 kg removed at that stage. First interior strip-out

Range Racer in the workshop during the weight-reduction work

The 400 hp figure describes the original supercharged engine specification. Photographs posted by Charlie in the PistonHeads build thread, reproduced with permission. Bedford and wheels · Strip-out photographs