Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Saab

Lammertse Techniek documents a manual Saab 9-3 Turbo X V6 project, including its engine rebuild, dyno result and subsequent turbo conversion. Read the builder’s complete project and updates.

Lammertse Techniek Saab 9-3 Turbo X in the workshop

Photo by Lammertse Techniek, from the original project post, reused with permission.

Build and development

The initial setup used a G25-660 hybrid turbo machined into the original housing, strengthened timing chains, a twin-plate clutch and MaxxECU. The builder reported 488 hp and 613 Nm on a hub dyno with the original exhaust behind a 3-inch downpipe.

After measuring exhaust backpressure, the team built a 3.5-inch downpipe and midpipe feeding twin exhaust branches and Magnaflow mufflers. In the update dated 12 January 2026, the builder described fitting an EFR 8374 turbo, custom high-flow manifolds and a fuel return system. The project title refers to 700+ hp. Consult the original build and dated update for the configuration and results at each stage.