Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This is a 2019 Ford Focus ST Mk4 owned by Sascha of Weinheim, bought new in October 2019 after a Fiesta ST. It carries a No. 69 livery designed by the owner and combines a Mountune Stage 1 calibration, Milltek exhaust and 19-inch Dotz Misano wheels. It was featured as a reader build in Evocars in April 2023.Sascha, from Weinheim, bought his Focus ST new in October 2019 after owning a Fiesta ST. He designed the No. 69 livery himself and supplied the photos for his April 2023 reader build in Evocars.Rear three-quarter view of Sascha’s No. 69 Focus ST. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
Engine and powerThe owner reports 330 PS with a Mountune Stage 1 calibration (owner-reported, not a published dyno result). The car also has an Airtec intake, Turbosmart recirculation valve and Milltek exhaust.Suspension, wheels and tyresEibach springs and wheel spacers sit behind black powder-coated Dotz Misano alloys. The wheels wear Michelin Pilot Sport 4S tyres in 235/35 R19.Bodywork and liveryMaxton supplied the front lip, side skirts, canards and roof spoiler, and a Rieger diffuser completes the rear. The No. 69 livery was designed by the owner.Engine, chassis and bodyworkSascha reported 330 PS with a Mountune Stage 1 calibration. He also listed an Airtec intake, Turbosmart recirculation valve and Milltek exhaust.Eibach springs and wheel spacers sit behind black powder-coated Dotz Misano alloys. The wheels wear Michelin Pilot Sport 4S tyres in 235/35 R19.Maxton supplied the front lip, side skirts, canards and roof spoiler. A Rieger diffuser completes the rear.Read Sascha’s original German-language specification and photo captions. The feature also links Sascha’s build account.Sascha’s wrapped ST photographed at sunset. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
SourcesEvocars reader build, April 2023: German-language specification and photo captionsOwner's Instagram build account, linked from the Evocars feature
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Sascha’s No. 69 Ford Focus ST Mk4
Sascha, from Weinheim, bought his Focus ST new in October 2019 after owning a Fiesta ST. He designed the No. 69 livery himself and supplied the photos for his April 2023 reader build in Evocars.

Rear three-quarter view of Sascha’s No. 69 Focus ST. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
Engine, chassis and bodywork
- Sascha reported 330 PS with a Mountune Stage 1 calibration. He also listed an Airtec intake, Turbosmart recirculation valve and Milltek exhaust.
- Eibach springs and wheel spacers sit behind black powder-coated Dotz Misano alloys. The wheels wear Michelin Pilot Sport 4S tyres in 235/35 R19.
- Maxton supplied the front lip, side skirts, canards and roof spoiler. A Rieger diffuser completes the rear.
Read Sascha’s original German-language specification and photo captions. The feature also links Sascha’s build account.

Sascha’s wrapped ST photographed at sunset. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
Revision 2: Sascha’s No. 69 Ford Focus ST Mk4
This is a 2019 Ford Focus ST Mk4 owned by Sascha of Weinheim, bought new in October 2019 after a Fiesta ST. It carries a No. 69 livery designed by the owner and combines a Mountune Stage 1 calibration, Milltek exhaust and 19-inch Dotz Misano wheels. It was featured as a reader build in Evocars in April 2023.

Rear three-quarter view of Sascha’s No. 69 Focus ST. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
Engine and power
The owner reports 330 PS with a Mountune Stage 1 calibration (owner-reported, not a published dyno result). The car also has an Airtec intake, Turbosmart recirculation valve and Milltek exhaust.
Suspension, wheels and tyres
Eibach springs and wheel spacers sit behind black powder-coated Dotz Misano alloys. The wheels wear Michelin Pilot Sport 4S tyres in 235/35 R19.
Bodywork and livery
Maxton supplied the front lip, side skirts, canards and roof spoiler, and a Rieger diffuser completes the rear. The No. 69 livery was designed by the owner.

Sascha’s wrapped ST photographed at sunset. Original photograph from Sascha’s Evocars gallery, reproduced with permission.
Sources