Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.Colinmcg71 recorded the changes to his Mk4 Focus ST in a multi-year Ford Owners Club thread. Read Col’s opening post.Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaustThe car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.InductionThe second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.How the build changedCol started with Mountune’s m330 calibration before fitting a downpipe with a sports catalyst and a sport petrol particulate filter for the m365 setup.He fitted matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres, followed by Eibach Pro-Kit springs. He listed a 20 mm drop at the front and 25 mm at the rear. Wheel and tyre post · Spring update.After his second Mountune carbon induction pipe failed, Col fitted an Airtec pipe and elbow and kept the Mountune filter. Induction update with engine-bay photos.Col later switched from m365 to Dreamscience Ultima RS. He described the car as feeling stronger on the new calibration. Col’s calibration update.The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspensionThe car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.SourcesFord Owners Club build thread: opening postFord Owners Club build thread: Mountune m330 calibrationFord Owners Club build thread: m365 downpipe setupFord Owners Club build thread: wheels and tyresFord Owners Club build thread: Eibach spring updateFord Owners Club build thread: Airtec induction updateFord Owners Club build thread: Dreamscience Ultima RS calibration
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Col’s Ford Focus ST Mk4 – Mountune m365 to Dreamscience Ultima RS
Colinmcg71 recorded the changes to his Mk4 Focus ST in a multi-year Ford Owners Club thread. Read Col’s opening post.

Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
How the build changed
- Col started with Mountune’s m330 calibration before fitting a downpipe with a sports catalyst and a sport petrol particulate filter for the m365 setup.
- He fitted matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres, followed by Eibach Pro-Kit springs. He listed a 20 mm drop at the front and 25 mm at the rear. Wheel and tyre post · Spring update.
- After his second Mountune carbon induction pipe failed, Col fitted an Airtec pipe and elbow and kept the Mountune filter. Induction update with engine-bay photos.
- Col later switched from m365 to Dreamscience Ultima RS. He described the car as feeling stronger on the new calibration. Col’s calibration update.

The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Revision 2: Col’s Ford Focus ST Mk4 – Mountune m365 to Dreamscience Ultima RS
Col's Mk4 Ford Focus ST is a modified ST that progressed from Mountune's m330 calibration to the m365 setup and then to a Dreamscience Ultima RS calibration, alongside a downpipe, revised induction piping, Revo RF019 wheels and Eibach Pro-Kit springs. The build is described by the owner in a multi-year Ford Owners Club thread.

Col’s ST on Revo RF019 wheels and Eibach springs. Original photograph from Col’s Ford Owners Club post, reproduced with permission.
Engine, calibration and exhaust
- The car started on Mountune’s m330 calibration. A downpipe with a sports catalyst and a sport petrol particulate filter then completed the m365 setup.
- The car later moved from m365 to the Dreamscience Ultima RS calibration. The owner reports that it feels stronger on the new calibration (subjective, no figures given). Calibration update.
Induction
The second Mountune carbon induction pipe failed. It was replaced with an Airtec pipe and elbow, and the Mountune filter was kept. Induction update with engine-bay photos.

The Airtec induction pipe in Col’s engine bay. Original photograph from Col’s induction update, reproduced with permission.
Wheels, tyres and suspension
The car runs matte anthracite Revo RF019 wheels with Michelin Pilot Sport 4S tyres (wheel and tyre post). Eibach Pro-Kit springs were added afterwards, with a listed drop of 20 mm at the front and 25 mm at the rear (spring update). The drop figures are owner-listed.
Sources