Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Opel
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This green Opel Speedster was collected in the Netherlands as a standard car by its owner, MCfab, and rebuilt around owner-fabricated titanium suspension components. The work covers suspension, steering, exhaust, brakes and carbon aero parts.MCfab collected a standard green Speedster in the Netherlands and began by stripping the suspension. He fitted three-way Nitron dampers and FRAP Racing ball joints, rebuilt the steering rack and replaced the steering ends. MCfab’s introduction and workshop photographsSuspension and steeringThe suspension was stripped first and fitted with three-way Nitron dampers and FRAP Racing ball joints. The steering rack was rebuilt and the steering ends replaced.The owner made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster, and also reinforced the rear suspension arms. Photographs show the bushes separately and pressed into the arms.Owner-made suspension partsMCfab made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster. He also reinforced the rear suspension arms. His photographs show the bushes separately and pressed into the arms. Suspension fabrication and parts listExhaust, brakes and bodywork
A titanium exhaust was fabricated by the owner, including work on a 4-2-1 manifold. Later changes record 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing.MCfab fabricated a titanium exhaust and described his work on a 4-2-1 manifold. A later post records 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing. Owner’s exhaust fabrication notes · Brake and aero updatePhotographs by MCfab, reproduced with permission. Original build gallery
SourcesLotus and Light Cars Club build thread: introduction, workshop photographs and suspension fabrication parts listLotus and Light Cars Club build thread: exhaust fabrication notesLotus and Light Cars Club build thread: brake and aero update
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MCfab’s green Opel Speedster with titanium suspension links
MCfab collected a standard green Speedster in the Netherlands and began by stripping the suspension. He fitted three-way Nitron dampers and FRAP Racing ball joints, rebuilt the steering rack and replaced the steering ends. MCfab’s introduction and workshop photographs

Owner-made suspension parts
MCfab made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster. He also reinforced the rear suspension arms. His photographs show the bushes separately and pressed into the arms. Suspension fabrication and parts list


Exhaust, brakes and bodywork
MCfab fabricated a titanium exhaust and described his work on a 4-2-1 manifold. A later post records 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing. Owner’s exhaust fabrication notes · Brake and aero update
Photographs by MCfab, reproduced with permission. Original build gallery
Revision 2: MCfab’s green Opel Speedster with titanium suspension links
This green Opel Speedster was collected in the Netherlands as a standard car by its owner, MCfab, and rebuilt around owner-fabricated titanium suspension components. The work covers suspension, steering, exhaust, brakes and carbon aero parts.

Suspension and steering
The suspension was stripped first and fitted with three-way Nitron dampers and FRAP Racing ball joints. The steering rack was rebuilt and the steering ends replaced.
The owner made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster, and also reinforced the rear suspension arms. Photographs show the bushes separately and pressed into the arms.


Exhaust, brakes and bodywork
A titanium exhaust was fabricated by the owner, including work on a 4-2-1 manifold. Later changes record 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing.
Photographs by MCfab, reproduced with permission. Original build gallery
Sources