Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Opel

MCfab collected a standard green Speedster in the Netherlands and began by stripping the suspension. He fitted three-way Nitron dampers and FRAP Racing ball joints, rebuilt the steering rack and replaced the steering ends. MCfab’s introduction and workshop photographs

MCfab’s dark green Speedster on the collection trip

Owner-made suspension parts

MCfab made the wishbone bushes with titanium inserts, the rear toe links and the washers used to adjust caster. He also reinforced the rear suspension arms. His photographs show the bushes separately and pressed into the arms. Suspension fabrication and parts list

Green suspension bush with its centre insert fitted to a black arm

Exposed suspension and brake assembly during MCfab’s workshop rebuild

Exhaust, brakes and bodywork

MCfab fabricated a titanium exhaust and described his work on a 4-2-1 manifold. A later post records 308 mm brakes with aluminium bells and the installation of a carbon splitter and wing. Owner’s exhaust fabrication notes · Brake and aero update

Photographs by MCfab, reproduced with permission. Original build gallery