Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Opel
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Vin5's Opel Speedster is a lime-green Italian-market 2002 car converted from naturally aspirated 2.2 to turbocharged with a dbilas Stage II kit. The owner reports 235 CV on the dyno at 0.6 bar (owner-reported, single source). Bought in 2014, it was first run on track naturally aspirated with reinforced rear toe links, braided brake lines and 308 mm front discs. The car was originally grey; the green respray has a gold pearl effect inspired by the Ford Focus RS. Build diary · Later specification and photosVin5 bought this Speedster in 2014. He first ran its naturally aspirated 2.2 on track with reinforced rear toe links, braided brake lines and 308 mm front discs. The car was originally grey. Its green respray has a gold pearl effect inspired by the Ford Focus RS. Vin5’s build diary · Later specification and photosTurbo conversion
The dbilas Stage II kit was fitted and the boost control subsequently revised. With a GReddy Profec controller, the later setup offers 0.3 bar and 0.6 bar settings plus a timed 0.8 bar overboost mode. The owner-reported dyno result is 235 CV at 0.6 bar. Choosing the turbo kit · Boost settings and reported dyno resultVin5 chose the dbilas Stage II kit and subsequently revised the boost control. With a GReddy Profec controller, the later setup offered 0.3 bar and 0.6 bar settings plus a timed 0.8 bar overboost mode. The owner reported 235 CV on the dyno at 0.6 bar. Choosing the turbo kit · Boost settings and reported dyno resultChassis, wheels and interiorThe later chassis specification includes three-way Nitron NTR46 dampers, Motec Nitro wheels and Toyo R888R tyres. The cockpit has Eltech V3 carbon seats, Willans four-point harnesses and a digital dash. Photographs by Vin5, reproduced with permission. Equipment list and original gallerySourcesLotus and Light Cars Club build diary: track use, respray and choosing the turbo kitLotus and Light Cars Club build diary: later specification, boost settings, reported dyno result and equipment listThe later chassis specification included three-way Nitron NTR46 dampers, Motec Nitro wheels and Toyo R888R tyres. In the cockpit, Vin5 listed Eltech V3 carbon seats, Willans four-point harnesses and a digital dash. Photographs by Vin5, reproduced with permission. Equipment list and original gallery
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Vin5’s lime-green 2002 Opel Speedster 2.2 Turbo
Vin5 bought this Speedster in 2014. He first ran its naturally aspirated 2.2 on track with reinforced rear toe links, braided brake lines and 308 mm front discs. The car was originally grey. Its green respray has a gold pearl effect inspired by the Ford Focus RS. Vin5’s build diary · Later specification and photos

Turbo conversion
Vin5 chose the dbilas Stage II kit and subsequently revised the boost control. With a GReddy Profec controller, the later setup offered 0.3 bar and 0.6 bar settings plus a timed 0.8 bar overboost mode. The owner reported 235 CV on the dyno at 0.6 bar. Choosing the turbo kit · Boost settings and reported dyno result

The later chassis specification included three-way Nitron NTR46 dampers, Motec Nitro wheels and Toyo R888R tyres. In the cockpit, Vin5 listed Eltech V3 carbon seats, Willans four-point harnesses and a digital dash. Photographs by Vin5, reproduced with permission. Equipment list and original gallery
Revision 2: Vin5’s lime-green 2002 Opel Speedster 2.2 Turbo
Vin5's Opel Speedster is a lime-green Italian-market 2002 car converted from naturally aspirated 2.2 to turbocharged with a dbilas Stage II kit. The owner reports 235 CV on the dyno at 0.6 bar (owner-reported, single source). Bought in 2014, it was first run on track naturally aspirated with reinforced rear toe links, braided brake lines and 308 mm front discs. The car was originally grey; the green respray has a gold pearl effect inspired by the Ford Focus RS. Build diary · Later specification and photos

Turbo conversion
The dbilas Stage II kit was fitted and the boost control subsequently revised. With a GReddy Profec controller, the later setup offers 0.3 bar and 0.6 bar settings plus a timed 0.8 bar overboost mode. The owner-reported dyno result is 235 CV at 0.6 bar. Choosing the turbo kit · Boost settings and reported dyno result

Chassis, wheels and interior
The later chassis specification includes three-way Nitron NTR46 dampers, Motec Nitro wheels and Toyo R888R tyres. The cockpit has Eltech V3 carbon seats, Willans four-point harnesses and a digital dash. Photographs by Vin5, reproduced with permission. Equipment list and original gallery
Sources