Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Alfa Romeo

Engine and instrumentation

After acquiring the GTV in 2008, tommi56 rebuilt the cylinder heads with Colombo e Bariani camshafts, replaced the tappets and overhauled the valves and injectors. A Bonalume intake trumpet and dump valve accompanied a stainless-steel Ragazzon Group N exhaust. The owner reported 255 CV on the dyno after remapping and added gauges for boost, exhaust gas temperature and oil pressure.

Chassis at Monza

The GTV ran Koni dampers, Eibach lowering springs and a Wiechers aluminium strut brace. Five-spoke 17-inch Alfa wheels wore 225/45 tyres. Lester spoilers and side skirts accompanied a full repaint in the original Verde Sargassi. The owner identified Monza as the circuit in the photographs.

The green GTV cornering at Monza

Side view of the GTV on its five-spoke wheels

Photographs shared by tommi56 on ClubAlfa.it and reproduced with permission.

Owner’s posts