Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
"Project WTF" is a Ford Focus RS Mk1 built into a front-wheel-drive competition car. It was bought in March 2009 by its owner, then aged 18, after he first saw it in Blackburn. Notable work includes a four-into-one turbo manifold and an external fuel system, and the owner described the car as making 500 bhp (owner-reported, unverified) when it competed in a late-2013 hillclimb.Jack bought this RS in March 2009 at age 18. His illustrated diary follows it from the car he first saw in Blackburn to a front-wheel-drive competition car. For a late-2013 hillclimb he described the RS as making 500 bhp.The RS as pictured early in Jack’s build. Jackstrath on PassionFord, reproduced with permission. Original photo post.
Drivetrain and repairsAn early update records a collapsed bearing, a broken driveshaft and damage to the drive flange, along with an engine-mount update.Engine and fuel systemThe car uses a four-into-one turbo manifold. The external fuel system layout uses a Bosch 044 pump and a custom swirl pot in the spare-wheel well. The 500 bhp figure is owner-reported for the late-2013 hillclimb and no dyno evidence is given on the page.CompetitionThe car was run at a hillclimb in late 2013, where the owner describes learning the braking points on the short course.Build updatesAn early update records a collapsed bearing, a broken driveshaft and damage to the drive flange. Jack later documented a four-into-one turbo manifold and the layout for an external fuel system using a Bosch 044 pump and a custom swirl pot in the spare-wheel well. His hillclimb report follows the same car into competition and describes learning the braking points on the short course.Jack’s numbered RS at the hillclimb. Jackstrath on PassionFord, reproduced with permission. Original photo post.
SourcesPassionFord build thread: build history and early photographsPassionFord build thread: driveshaft repair and engine-mount updatePassionFord build thread: turbo manifold and fuel-system layoutPassionFord build thread: late-2013 hillclimb reportOriginal postsOriginal build history and early photographsDriveshaft repair and engine-mount updateTurbo manifold and fuel-system layoutLate-2013 hillclimb report
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Jackstrath’s Ford Focus RS Mk1 race car “Project WTF”
Jack bought this RS in March 2009 at age 18. His illustrated diary follows it from the car he first saw in Blackburn to a front-wheel-drive competition car. For a late-2013 hillclimb he described the RS as making 500 bhp.

The RS as pictured early in Jack’s build. Jackstrath on PassionFord, reproduced with permission. Original photo post.
Build updates
An early update records a collapsed bearing, a broken driveshaft and damage to the drive flange. Jack later documented a four-into-one turbo manifold and the layout for an external fuel system using a Bosch 044 pump and a custom swirl pot in the spare-wheel well. His hillclimb report follows the same car into competition and describes learning the braking points on the short course.

Jack’s numbered RS at the hillclimb. Jackstrath on PassionFord, reproduced with permission. Original photo post.
Original posts
Revision 2: Jackstrath’s Ford Focus RS Mk1 race car “Project WTF”
"Project WTF" is a Ford Focus RS Mk1 built into a front-wheel-drive competition car. It was bought in March 2009 by its owner, then aged 18, after he first saw it in Blackburn. Notable work includes a four-into-one turbo manifold and an external fuel system, and the owner described the car as making 500 bhp (owner-reported, unverified) when it competed in a late-2013 hillclimb.

The RS as pictured early in Jack’s build. Jackstrath on PassionFord, reproduced with permission. Original photo post.
Drivetrain and repairs
An early update records a collapsed bearing, a broken driveshaft and damage to the drive flange, along with an engine-mount update.
Engine and fuel system
The car uses a four-into-one turbo manifold. The external fuel system layout uses a Bosch 044 pump and a custom swirl pot in the spare-wheel well. The 500 bhp figure is owner-reported for the late-2013 hillclimb and no dyno evidence is given on the page.
Competition
The car was run at a hillclimb in late 2013, where the owner describes learning the braking points on the short course.

Jack’s numbered RS at the hillclimb. Jackstrath on PassionFord, reproduced with permission. Original photo post.
Sources