Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This white Ford Focus Mk3 RS is owned by Focus RS Forum member meFiSTo and was prepared for track days at The Ridge Motorsports Park in Shelton, Washington. Changes so far concentrate on drivetrain mounting, braking and safety equipment, with owner-reported brake performance from track use.Focus RS Forum member meFiSTo prepared this white RS for track days at The Ridge Motorsports Park in Shelton, Washington. The diary follows the chassis and braking changes alongside reports from the track.The white RS at its first track day. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
Drivetrain and brakesThe rear motor mount is a Mountune part (identified in July 2018, around the first track day). For the second track day in August 2018 the car ran Mountune track-compound pads with Brembo brake fluid, and the owner reported no brake fade that day.Safety equipmentA Safecraft PB2 fire extinguisher is fitted to a Kap Industries seat bracket.Build updatesIn July 2018 the owner identified the rear motor mount as a Mountune part and posted a photo from the first track day. The August report records a second day on Mountune track-compound pads with Brembo brake fluid and no brake fade that day. A later illustrated update shows the Safecraft PB2 fire extinguisher fitted to a Kap Industries seat bracket.The fitted fire extinguisher and bracket. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
SourcesFocus RS Forum build thread: opening build postFocus RS Forum build thread: first track day and rear motor mountFocus RS Forum build thread: August track report, brake notes and videoFocus RS Forum build thread: fire extinguisher installation photosOriginal postsOpening build postFirst track day and rear motor mountAugust track report, brake notes and videoFire extinguisher installation photos
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: meFiSTo’s Ford Focus Mk3 RS track build at The Ridge
Focus RS Forum member meFiSTo prepared this white RS for track days at The Ridge Motorsports Park in Shelton, Washington. The diary follows the chassis and braking changes alongside reports from the track.

The white RS at its first track day. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
Build updates
In July 2018 the owner identified the rear motor mount as a Mountune part and posted a photo from the first track day. The August report records a second day on Mountune track-compound pads with Brembo brake fluid and no brake fade that day. A later illustrated update shows the Safecraft PB2 fire extinguisher fitted to a Kap Industries seat bracket.

The fitted fire extinguisher and bracket. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
Original posts
Revision 2: meFiSTo’s Ford Focus Mk3 RS track build at The Ridge
This white Ford Focus Mk3 RS is owned by Focus RS Forum member meFiSTo and was prepared for track days at The Ridge Motorsports Park in Shelton, Washington. Changes so far concentrate on drivetrain mounting, braking and safety equipment, with owner-reported brake performance from track use.

The white RS at its first track day. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
Drivetrain and brakes
The rear motor mount is a Mountune part (identified in July 2018, around the first track day). For the second track day in August 2018 the car ran Mountune track-compound pads with Brembo brake fluid, and the owner reported no brake fade that day.
Safety equipment
A Safecraft PB2 fire extinguisher is fitted to a Kap Industries seat bracket.

The fitted fire extinguisher and bracket. meFiSTo on Focus RS Forum, reproduced with permission. Original photo post.
Sources